Quantity   Component name
2 × ID-12 RFID tag reader Sparkfun part # SEN-08419 (LA version is replacement)
2 × XBee Series 1 module Sparkfun part # WRL-11215
2 × Adafruit XBee Adapter board Adafruit Product ID: 126
2 × Arduino ProMini 328 5V Sparkfun part # DEV-11113
1 × Arduino ProMini 328 3.3V Sparkfun part # DEV-11114
1 × Arduino Pro 328 5V Sparkfun part # DEV-10915
1 × Adafruit WaveShield Adafruit Product ID: 94
1 × Pololu 5V DC/DC converter D24V5F5 Steps down the helmet 7.4V battery voltage for the ProMini
5 × Hitec HS-5055MG sub-micro servo For the forearm gauntlet /hip pods- Servocity.com
8 × Hitec HS-85MG micro servo For the shoulder rocket pods/ hip pods- Servocity.com
3 × Hitec HS-82MG servo micro For the forearm gauntlet pod/shoulder rocket pods- Servocity.com
2 × Hitec HS-485HB standard servo For the back flaps- Servocity.com
1 × Hitec HS-5087MH micro servo For the helmet chin section- Servocity.com
1 × Hitec HS-7245MH mini servo For the helmet faceplate- Servocity.com
4 × 16mm RFID button tag (125 kHz) Sparkfun part # SEN-09417
2 × Luxeon Rebel high power white LED For the lights in the boots Sparkfun part # BOB-09656
1 × Sharp GP2D120XJ00F Infrared Proximity Sensor Sensor for the bottom of the boot Sparkfun part # SEN-08959
8 × RJ45 8-pin connector Ethernet cable connector Sparkfun part # PRT-00643
6 × Breakout Board for RJ45 Sparkfun part # BOB-00716
1 × 7027 "BuckToot" LED Driver Module To power the Luxeon LEDs Sparkfun part # COM-09642
3 × JST RCY Connector For the helmet battery pack Sparkfun part # PRT-10501
6 × AAA NiMH cells 1.2V For the helmet battery pack
2 × RFID reader breakout Sparkfun part # Product SEN-08423
1 × SD/MicroSD Memory Card (4 GB SDHC) Adafruit Product ID: 102
4 × Break Away Headers - Straight For making connectors/servo leads Sparkfun part # PRT-00116
4 × Female Headers For making connectors/servo leads Sparkfun part # PRT-00115
2 × Adafruit Perma-Proto Quarter-sized Breadboard For mounting connectors, etc. Adafruit Product ID: 589