0%

0%

José Pereira

I might change this later

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/17/2020.

Projects I Like & Follow

The 2017 Hackaday Prize

A versatile autonomous environmental drone using a buoyancy engine

OSUG: Open-Source Underwater Glider

Focused on making clear every building step with helpful links and tips for total noobs (like me) who wants to get started with drones

My first copter build with RPi2 and Emlid Navio2

Dmitriy Dmitriy

An easy to use audio board with a YM3812 OPL2 chip like used in the Adlib and SoundBlaster cards from back in the day...

OPL2 Audio Board for Arduino & Raspberry Pi

Maarten Janssen

ice40 FPGA based custom board to control eink display

FPGA eink controller

The desktop with an arduino as the main processor. Multitasking, Gaming, Graphics, and (later) File IO

Arduino Desktop

Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!

LadyBug BEEFY: 3D printer motorized microscope

M-Bus Shield for smartmetering with Arduino MKR

Arduino M-Bus Shield

The 2018 Hackaday Prize

This is low cost 3d printed robot arm based on Ikea Tertial lamp.

Tertiarm - 3d printed robot arm

Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.

Octoshield

GOODWIN GOODWIN

The 2017 Hackaday Prize

Use any Bluetooth 4.0(BLE) device to control this agile little modular drone.

The UnbreakaBLE Micro Drone

Anshul Sanamvenkata

The Cyclone5 DE1-SoC has a nice audio codec, with support on the Intel/Altera Avalon bus. An Avalon bus master does the DSP, and runs codec

Audio DSP on DE1-SoC

For everyone who wants to develop ATtiny10 on Arduino IDE

ATtiny10 Dev Environment on Arduino IDE

Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.

3D Printed Open Source UPcycler : SHRED-Buddy3D

The 2017 Hackaday Prize

Universal Robotic Unmanned System

URUS

Android Smartphone Serving Kindle VNC Viewer

KindleDroid - Mobile Linux in the sun.

LCR meter, PDF and Gerber file share

AVR Transistor tester, Utsource view

Electroniclovers123

Here I describe my method for making 1 and 2 layer PCBs at home via lithography and etching

Yet another guide on how to make PCBs at home

Here’s an excellent model to practice some sculpting with Fusion 360. It's an adorable ghost that can be 3D printed.

Sculpting in Fusion 360

View all

Bits