0%

0%

Adnan.R.Khan

I am a creative, innovative guy always looking for a solution of different problems! i.e basically I am an passionate engineer:)

India

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/18/2018.

My Projects

Hackaday Prize 2019

This helmet has turn & brake lights for improved rider visibility and security synced with motorcycle and bluetooth headset

smart helmet with wireless brake,turn light & Blth

adnanrkhan Adnan.R.Khan

Hackaday Prize 2019

I made a simple mechanism for opening & closing my pre-installed door latch,and combined it with Arduino Uno via some simple coding.

Automatic Door Locking System Controlled By Mobile

adnanrkhan Adnan.R.Khan

Hackaday Prize 2019

It detects your presence & turns the light on and off.

Motion Sensor Light Switch(automatic Light Switch)

adnanrkhan Adnan.R.Khan

Things I've Built

Wireless door lock attachment controlled via mobile

I made this attachment for my home door. Which can be attached with the door latch to convert it into a wireless door lock. Made the mechanism which triggers the latch and a mobile app which controls the lock via Bluetooth (through Arduino)

Projects I Like & Follow

The 2016 Hackaday Prize

OpenSource 3D printable Robotic Arm

Thor

angellm AngelLM

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

Hackaday Prize 2019

Open, 3D printed, multi axis robot arm

Sixi robot arm

dan-royer Dan Royer

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

lukas-vacek Lukas Vacek

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

OPEN SOURCE / 3D printed robot. Arduino M0 based and created using common elements from the Makers/ 3D printers World.

PyBot SCARA Robotic Arm (3D printed + Python)

jjrobotscom jjrobots.com

The 2017 Hackaday Prize

Internet enabled (IOT) weather station using the GPRS network

Arduino GPRS IOT Weather Station

capt-flatus-oflaherty Capt. Flatus O'Flaherty ☠

Ok maybe its not the ULTIMATE drone but I didn't hold back on the parts list. Everything is designed to be super compact and customizable.

The Ultimate Pi Zero/Arduino/FPV Racing Drone

3D printed four Joint Robot Arm. Three of these joints have triple cycloidal gearboxes with 30:1 ratio powered by NEMA 17 stepper motors

Triple Cycloidal Robot Arm

paul-gould Paul Gould

Yet another IR-blaster, but this time with CEC (and WIFI)

IR-blaster with CEC

myles-eftos Myles Eftos

A simple programmable infrared volume controller using Digispark or ATTiny85 and PT2257

Volume85

stefano-risato Stefano Risato

The 2017 Hackaday Prize

IOT smoke and fire alarm to send SMS notification if it detects smoke and leakage of combustible gas.

IOT smoke alarm with SMS notification

A device that enables multi axis control in a single hand, with a form factor optimized for drone flying

Six axis joystick

patrick-thomas Patrick Thomas

Turn your regular car into a smart car with those easy tricks for only $50-$70 of components

DIY Smart Car System

A high power amateur sounding rocket for delivering PocketQube STEM science payloads to the exosphere - 40 km+

ARLISS Extreme

ken-biba Ken Biba

A little RC robot to entertain birthday parties

B·Day Bot

julio-vazquez Julio Vazquez

Birtha is the name of our RV. Projects and automation are inevitable.

BIRTHA - Base Interface RV/Trailer Home Automation

daren-schwenke Daren Schwenke

The 2018 Hackaday Prize

Rufus, ROBOTIC ARM PROGRAMMABLE ANTHROPOMORPHIC MANIPULATOR, LOW COST AND LOW COMPLEXITY.

Rufus, ROBOTIC ARM PROGRAMMABLE ANTHROPOMORPHIC

henri-vanini-coelho Henri Vanini Coelho

View all

Bits