Close
0%
0%

ilia

just an account to cheer up one developer

Following
Send a private message
Similar accounts worth following
1 Followers
18 Following
0 Projects
0 Likes
ilia
Send a private message

This user joined on 11/16/2021.

160k
4.4k
53
783
The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.
Project Owner Contributor

Automatic Infinite 3D Printer

swaleh-owaisSwaleh Owais

155.5k
765
62
488
Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.
Project Owner Contributor

DIY Pick and Place

anthonywebbanthony.webb

53.1k
3.6k
19
234
A computer running the BASIC programming language, generating composite video and reading PS/2 keyboard input using a single AVR.
Project Owner Contributor

Single Chip AVR BASIC Computer

danDan

35.9k
1.6k
9
109
A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)
Project Owner Contributor

The Launchpad - A $2 Arduino Nano alternative

clyde-d-corpuzClyde D. Corpuz

32.2k
6.9k
14
41
Arduino connects to the TX line (of a router, RPI) and display serial data on smartphone over WiFi
Project Owner Contributor

Hardware serial port monitor with WiFi

frenkyFrenky

14.8k
198
28
190
Finally a mouse that can be freely changed, fixed and upgraded suit the user.
Project Owner Contributor

RX-Modulus (Completely Modular Mouse)

benwbenw

10k
1.2k
12
70
the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!
Project Owner Contributor

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

igorIgor

8.7k
4.1k
2
26
Superfast Modular 3D Printing
Project Owner Contributor

ORB 3D Printer

thomas-suarezThomas Suarez

6.1k
4.6k
8
22
Use your PIC-Projects on Mini-PCIe (USB/SMBus)
Project Owner Contributor

Mini-PCIe - PIC18LF2550 - DevBoard

sandfrogSandfrog

5.7k
5.7k
0
13
Designing hardware is difficult. We Have a hardware platform that generates schematic and layout design files in a typical 10 minutes time.
Project Owner Contributor

Simplify Embedded hardware designs

makarand-kapoorMakarand Kapoor

5.4k
4.5k
1
13
Receive force sensor reports from the 3d printer extruder at regular intervals on your mobile device.
Project Owner Contributor

3D Printer Extruder Remote Health Monitoring

mark-heywoodMark Heywood

4.4k
1.9k
5
18
I'm tired of flying insects and chasing after them....
Project Owner Contributor

Lazy Killer 9000

bdmBDM

2.7k
10
0
7
This project shows the build of a 150mm DIY 4th axis (based on a harmonic drive reduction) with an electromagnetic disk brake.
Project Owner Contributor

DIY CNC 4th Axis with Brake

fernandoFernando

2.6k
22
10
16
Custom Spot Welder machine based on MOT
Project Owner Contributor

Spot Welder

andyAndy

2.6k
2.5k
3
23
An Open Source TOTP based hardware authenticator using ESP32.
Project Owner Contributor

Open Authenticator

vedant-paranjapeVedant Paranjape

2.3k
2.3k
0
15
Experimenting with 3D printed tools.
Project Owner Contributor

3D Printed Opensource Tools

progressthProgressTH

1.8k
831
1
15
Minimal Z80 computer with CP/M
Project Owner Contributor

CP/M on a minimal Z80 Computer

doctor-voltDoctor Volt

1.4k
1.4k
8
33
Cornell University ece4760 "Microcontrollers as Design Components". Now using PIC32! Past years used AVR.
Project Owner Contributor

Teaching microcontroller use at Cornell

bruce-landBruce Land

Share this profile

Share

Bits

Send a private message to ilia

Become cool instantly

Create your Hackaday.io profile like ilia and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2023 Hackaday

Report user as inappropriate

You are about to report the user "ilia", please tell us the reason.