0%

0%

Gurianov_A

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/11/2017.

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2017 Hackaday Prize

The only thing worth doing, is the thing worth doing right!

DAV5 V3.01 Raman Spectrometer

david-h-haffner-sr David H Haffner Sr

The 2016 Hackaday Prize

A project about Home Automation. I want to replace my old thermostat with an IoT ESP8266 + OLED 128x64 Screen + OpenHab + MQTT + Micropython

Home automation: thermostat with ESP8266 & OpenHab

A PCB mill inspired by open source CNC 3D printers with a custom design to fit standard size copper clad boards (6" x 4" / 160mm x 100mm)

Sub $200 PCB Mill that doesn't suck!

timo-birnschein Timo Birnschein

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Transmit on the license free Longwave band using your Arduino!

LowFER Transmitter for your Arduino

casey-halverson Casey Halverson

New cross slide, BLDC spindle motor, custom 32-bit grbl port, spindle sync, threading (G76), MPG controller+++

Mini Lathe (Emco Compact 5) CNC Conversion

terje-io Terje Io

CAN Bus Arduino Clone

Official Hackaday Prize Entry

Open automation system, starting with lights and occupancy sensing and expanding to encompass anything that has wires or electrical contacts

Home Automation System (to rule them all!)

Those <5$ calipers lack information about internals on the internet. I change that.

Cheapest Plastic Electronic Digital Caliper DRO

michael-skrepsky Michael Skrepsky

Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.

3D Printed Chamfer Tool

alex-rich Alex Rich

Using fast PWM capabilities of some AVR MCUs to make sounds using DDS.

sound_chip_AVR

ethan-durrant Ethan Durrant

2.4" Nextion Display on Holzmann ED300FD Lathe

Nextion DRO

Regular sleep masks uncomfortable, let in too much light, or are otherwise just not cutting it? Why not make one yourself?!

More 3D Printed Molds: Custom Sleep Mask

Simplified AVR Prototyping with a breadboard-friendly breakout

T-Board: uc Prototyping

andrew-retallack Andrew Retallack

To celebrate 1000 subs on my YouTube Channel, I designed a custom YouTube Play Button.

Arduino YouTube Play Button

sean-hodgins Sean Hodgins

Packet IR for AVR at 4800 baud, with less than 0.1% packet loss at 3 m.

Infrared serial link for AVR

bruce-land Bruce Land

The 2016 Hackaday Prize

I am upgrading my prusai3 to a massive build volume during which I will also be adding peristaltic pumps, for printing batteries

3d Battery Printer

View all

Bits