0%

0%

Antecer

hardware engineer

China

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 10/14/2020.

Projects I Like & Follow

A 3D printer for printing with welding wire

Wire 3D Printer

dominik-meffert Dominik Meffert

The 2017 Hackaday Prize

DIY DLP 3D Printer based on NanoDLP Software using Raspberry Pi 3 and Trinamic Motor Controller

ADAM DLP 3D Printer

The 2018 Hackaday Prize

Flip-Flop design with just one transistor. Nice for transistor-CPU's ! The principle can also be used for vacuum tube flipflops.

One Transistor FlipFlop

The Hydrosys4: control system for irrigation based on Raspberry Pi

Hydrosys4 - Irrigation System

Use the actual Sega Genesis sound chips to play chiptune files!

Sega Genesis Native Hardware Chiptune Synthesizer

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

ESP32 runs FabGL to produce VGA display

ESP32 VGA PS/2

land-boardscom land-boards.com

The 2018 Hackaday Prize

This project will give you full gesture control of any virtual Hero you like with a simple set of inexpensive devices using sensors on RPi

Immersive VR on Rpi to control a Hero with sensors

jeanperardel jean.perardel

extended control of heater/pump/blower, costs tracking and preview, alert up-on fault, LED lights add-on

Lay-Z Spa Remote Control

The 2017 Hackaday Prize

Automate the button-pressing activity on a 433.92Mhz Gate remote controller, for the purpose of tests and measurement

Arduino-controlled Gate remote control

clovis-fritzen Clovis Fritzen

Using 2 IKEA Lack Tables I am creating a Large Format 3d printer with a build platform of X 340mm Y310mm Z 300mm

PRINTTABLE an affordable, attractive 3d printer.

I'm attempting to recycle my household plastic into usable 3D printer filament

Recycling Household Plastic for 3D printing

Hackaday Prize 2019

An Arduino-based USB keyboard simulator which injects keystrokes via Bluetooth protocol or predefined payloads in SD card

Arduino USB Keystroke Injector (Arduino BadUSB)

amirreza-nasiri Amirreza Nasiri

A smart ESP32 powered Home Automation System. It could be embedded in switchboards of your house.

ESP32 powered Home Automation System

akshay-baweja Akshay Baweja

Circuit sculpture using electroforming for organic-ish blinkenlights

circuit sculpture Fail-o-rama

2021 Hackaday Prize

Robot on a tank chassis with a manipulator and FPV camera.

General purpose remote controlled mobile robot

Simple pcb module for PICkit2

PICkit2 to AVR/Flashrom (SPI) adapter

A simple design of a signal booster that can be used to extend the GSM frequency.

GSM SIGNAL BOOSTER v1.0

View all

Bits