0%

0%

Mike G

iPod enthusiast

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/14/2021.

Projects I Like & Follow

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

A last gasp Uninterruptible Power Supply for any Raspberry Pi computer.

Single SuperCapacitor UPS for Raspberry Pi

The 2017 Hackaday Prize

This project focuses on using building a budget powder bed 3d printer capable of printing bones, and creating the needed ink and powder.

Printing bones on a DIY powder bed 3d printer

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Hackaday Prize 2019

Convert your GameCube controller to Bluetooth for playing on the Switch, emulators and more

BlueCubeMod: Bluetooth GameCube Controller Mod Kit

The 2017 Hackaday Prize

A device to quickly crack PIN codes on Ford automobiles with a PIN entry keypad, and to demonstrate the shortcomings of this system.

Five Finger Code Finder

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Hackaday Prize 2020

A cloud-based platform enabling data-driven farming to increase yield and automate agriculture

IoT Farms - The Future of Agriculture

Make a low-cost rhythmic Holter with a communication in real-time of the electrocardiogram from patient to doctor.

Wireless ECG

The 2018 Hackaday Prize

An IoT Air Freshener, using some 3D printing, a NodeMCU, Arduino IDE, IFTTT and Adafruit.IO. Configure your own triggers and have fun!

IoT Air Freshener

The performance of CM3L Computer Book of Raspberry Pi can not only fluently simulate PS1, but also can simulate NDS, DC and PSP etc.

Raspberry Pi handheld game console

Cirmall Cirmall

A USB HID gamepad integrated into a phone case.

Cuttlephone: Gamepad Phone Case

The 2018 Hackaday Prize

Early computer designers were cheap masochists. This front panel is much better yet could have been made 50 years ago !

Hardware assembler / EMUI

Yann Guidon / YGDES

The 6502 Companion is intended to be a development / learning environment for the 6502 microprocessor.

The 6502 Companion

Breakout board intended to secure Raspberry PI or others IoT products thanks to SE050 secure element from NXP

SE050 Security Breakout Board

The 2017 Hackaday Prize

PATA(IDE) Hard Disk MP3 Music Player Source Code

PATA(IDE) Hard Disk MP3 Music Player

View all

Bits