0%

0%

Blake

I make stuff that makes stuff

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/30/2020.

Projects I Like & Follow

Wearable prototype breadboard used as LED wristwatch

Breadboard Wristwatch

Hackaday Prize 2020

Pocket sized ESP32 display board with 180µW Always On Display and Gyro Controls

Low Power ESP32 Handheld

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

Vojislav Milanovic

K3lso is a quadruped robot similar to MIT mini cheetah and MIT Cheetah 3.

K3lso Quadruped

A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.

Minimal Raspberry Pi CM 4 Carrier

Prof. Fartsparkle

(Working Title)

Concrete Physics Clock

In this project I use adressable RGB leds to make a linear clock. The clock will be connected to Google Calendar to show my appointments.

Linear Calendar Clock

A Clock style barometer, that displays the current weather with different slides, driven by an arduino, 5 servos a PCA9685 and a bmp280.

Tempestas II, A Clock style Barometer

Hackaday Prize 2020

A clock that tells the time using foam balls floating inside transparent tubes https://youtu.be/eGN-MeLun5U

AirFlow Clock

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

Replacing the guts of a broken Powerbook with everyone's favorite SBC

Raspberry Pi Powerbook

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

how to setup Phabricator on a raspberry pi 3B+ with a RAID on usb sticks to store the data somewhere else than on the SD card

Phabricator on raspberry pi

Nathann Nathann

Simple pcb that control air conditioner over the internet

ESP8266 AC Controller

How I built an Arduino energy monitor and data logger to collect energy data for different loads and plotted that data using Excel.

Building an Arduino Energy Monitor & Data Logger

Sridhar Rajagopal

I love these vintage VFD tubes!

IV-18 VFD Clock

sjm4306 sjm4306

A cute colour-changing LED tiara.

Circuit Sculpture LED Tiara

Alexandra Covor

Design and build a hand-held AVR-ISP adapter using Pogo pins

AVR ISP POGO PIN ADAPTER

View all

Bits