0%

0%

bnbjordan

Summary

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/02/2016.

Projects I Like & Follow

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

The 2018 Hackaday Prize

A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.

HiveTracker

A minified replica of the Apple 1 computer

Apple 1 Mini

ruud-van-falier Ruud van Falier

A Pi emulating a GameBoy sounds cheap. What about an FPGA?

VerilogBoy - GameBoy on FPGA

wenting-zhang Wenting Zhang

The 2018 Hackaday Prize

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

Smart Motor Driver for Robotics

danny-fr Danny FR

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

A 1" by 1" 20msps Oscilloscope based on the PIC32MZ

1 Square Inch 20msps Oscilloscope

mark-omo Mark Omo

The 2017 Hackaday Prize

A WiFi fidget spinner, taken from concept to ordering parts in one weekend

IoT POV Fidget Spinner

The 2017 Hackaday Prize

An electrically actuated variable pitch rotor with a wireless interface

EVPR: Electric Variable Pitch Rotor

peter-mccloud Peter McCloud

The 2018 Hackaday Prize

JACA - Just Another CPU Again Homebrew CPU, starting by a simple POC 4-bit CPU on circuit simulator soft. (done), then 8-bit (in progress)

JACA 1 & 2 Homebrew Computer

andre-baptista Andre Baptista

USB MSD Bootloader for PIC Microcontrollers

USB μC - USB PIC Bootloader

Printed desk toys demonstrating the function of a tourbillon for those that can't afford a stratospherically expensive mechanical watch

3D-Printed Flying Tourbillon Models

By means of motor vectoring

Model rocket with active stabilization

40-DPI monochrome LED module designed for persistence-of-vision displays. 16-element bargraph in an 8-pin castellated DIP package.

Rotovis-Mod1

The 2017 Hackaday Prize

Fully 3D-printable electric longboard drivetrain with built-in idler system.

3D-Printed Electric Longboard

yowhwui yowhwui

Time from space on an ATTiny13A

GPS Wall Clock

stephen-holdaway Stephen Holdaway

The 2017 Hackaday Prize

capable of supplying up to 10A at up to 24V or 5A on each channel

Arduino Lab Power Supply

Pi handheld in a custom wooden case

Wooden Pi Handheld

Josh Baumgardner

View all

Bits

Domus Amoris wrote 01/02/2019 at 09:09

Thanks for following my project :D https://hackaday.io/project/163012-model-rocket-with-active-stabilization

Are you sure? yes | no

RUN.CAM wrote 07/12/2017 at 14:29

Thank you for following RGGBer project. It is now live on

https://www.crowdsupply.com/jie-zou/rggber-dev-kit and we will launch it in Aug 2017 and you may sign up for latest information. RGGBer Dev Kit makes embedded vision development easy!

Are you sure? yes | no

Eric Hertz wrote 01/17/2017 at 14:01

Howdy! Thanks for the follow!

Are you sure? yes | no