0%

0%

Bentleyothomas

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/10/2014.

Projects I Like & Follow

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Follow this project to learn how to use FPGAs and incorporate them into your projects.

The Hobbyists Guide to FPGAs

luke-valenty Luke Valenty

The 2018 Hackaday Prize

An open hardware-software framework based on inertial sensors that anyone can use to build a human motion capture system.

Motion Capture system that you can build yourself

bruno-laurencich Bruno Laurencich

The CAT Board is part of a Raspberry Pi-based hand-held FPGA programming system.

CAT Board

dave-vandenbout Dave Vandenbout

Each axis: ̶$̶5̶ ̶$̶8̶ $10 motor+lead screw, 3x LM6UU, 3x 6mm x 100mm rod, 1/8in hardboard, PC case screws

Minamil 2dc: a minimal CNC mill

paul-mcclay Paul McClay

A 3d-printed bipedal robot. A desktop option for semi-direct drive walking research.

TipTap

darren-v-levine Darren V Levine

Hackaday Prize 2019

It is compatible with standard stepper motor diver, cnc or GRBL shield, direct replacement of X-Y stepper motors.

2D stepper motor etched on PCB - micro manipulator

Hackaday Prize 2019

A tool invented to make use of a extremely durable, cheap and ubiquitous material that allows to make things simply, from PVC pipes.

The Pipeline Project

christophe-machet Christophe Machet

I'm building a robot which requires small, articulated joints. Unfortunately I couldn't buy any, so I made my own.

Custom Articulated Joint

tim-wilkinson Tim Wilkinson

Hackaday Prize 2019

A focus tool for the digital age. Increase focus, boost productivity, and beat procrastination.

POD

gary-peng Gary Peng

The 2015 Hackaday Prize

Just in Time Logic

Fabric8

nick-johnson Nick Johnson

This is the second part (DDR SDRAM) of the FPGA tutorial that guides you step by step from basics to implementation.

Learning FPGA And Verilog-Beginner’s Guide Part 6

Official Hackaday Prize Entry

We've taken a simple CNC base and are writing a python code that can generate CAD drawings based on your needs. ~$100 build.

Inexpensive Multipurpose Parametric CNC Base

eric-jacob Eric Jacob

Simple SoC written in VHDL.

MARK-II

vladislav-mlejneck Vladislav Mlejnecký

Bringing Python down to the metal in an FPGA to actually get high performance with fast GPIO and megabytes of memory.

Apodora - A Python-Native Microcontroller

adam-guilmet Adam Guilmet

Printrbot may have shutdown, but I want my mini factory gosh darnit

PrintrFactry

View all

Bits

Bruno Laurencich wrote 09/07/2018 at 08:54

Hi, thanks for following my #Motion Capture system that you can build yourself !

Are you sure? yes | no

Vladislav Mlejnecký wrote 09/09/2017 at 22:34

Thank you for following my project. I will try to write more logs.

Are you sure? yes | no

Dave Vandenbout wrote 05/07/2016 at 12:00

Thanks for following the CAT Board!

Are you sure? yes | no