Electronics tinkerer, ham radio operator
This user joined on 07/12/2014.
In order to follow projects & hackers or give likes
you need to create an account.
Thanks for #Pablo Odysseus :-)
Are you sure? yes | no
Hi, thanks for following and like # Box for Resume 3D Print automatically
thanks for following #Flying Sniffer
Thanks for following my Hackable LoRa project!
Thank you for following my project :)
Hi there, thanks for following #ALio : New Hardware Prototyping Platform. For more information please check and support us on https://t.co/oSAgLBppY1
Hey chamito, gracias por el follow en el proyecto #BlackMirrorProject, más noticias al final de semana cuando publiquemos el resto de la documentación
Thanks for following the #Robo-Dog
Hi, Thanks for liking and following my project InspectorBot !
Howdy CWC! Thanks for the project-follows!
thanks for another!
Thanks for following AnanasStepper 2.0!!!https://hackaday.io/project/20980-ananasstepper-20
Thank you for following my #LiFePO4wered/18650 and #LiFePO4wered/Pi+ projects. :)
Thanks for following the CAT Board!
Thanks for following the Solar Car for 15k!
Thanks for following! - you might also like my printer:
Howdy, yo! Thanks for the follow!
Thanks for following the uRADMonitor project. If you want to support the development (but also help with the Igg campaign), you can purchase one of the available detectors on https://www.indiegogo.com/projects/uradmonitor , the solderable KIT1 for instance was very well received by the Makers community, and there is also an ongoing competition on http://www.uradmonitor.com/topic/soldering-the-kit1/ . Thanks again, Radu
Thanks for the follow!
Thanks for following my Antenna Rotator Project! The mechanical part is done, the top level systems/software part is taking more time and work than I expected.
Thanks for the ViaConnect like! I hope it helps with projects you have.
Create your Hackaday.io profile like CWC and many others
© 2018 Hackaday
You are about to report the user "CWC", please tell us the reason.