0%

0%

danjhamer

A maker and engineer keen on electronics and 3d printing

Kent,United Kingdom

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/29/2014.

My Projects

The Matrix clock is a single board, highly compact, Arduino compatible clock that displays the time and animations on an LED matrix.

Matrix Clock V1.0

A tiny, Arduino compatible, control board for WS2812B RGB LED strips that can be soldered directly on to the pads at the end of the strip.

ChromaTab

Projects I Like & Follow

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

Official Hackaday Prize Entry

Metal parts for people other than blacksmiths. A system to perform aluminium "lost PLA" casting with no propane, and no danger to humans.

Microwave Aluminium Printing

julia-longtin Julia Longtin

The 2015 Hackaday Prize

A tiny processor board the size of a 16 pin DIP with Bluetooth Low Energy

OSHChip V1.0

The 2016 Hackaday Prize

We aim to make multi-robot systems a viable way to introduce students to the delight that is robotics.

Micro Robots for Education

joshua-elsdon Joshua Elsdon

Advanced Pick and Place machine

brdMaker

mika-heikkinen Mika Heikkinen

This is a custom designed 3D printed skittles sorting machine that sorts skittles by color into bins.

3D Printed Skittles Sorting Machine

nathan-peterson Nathan Peterson

Let's find out if I can use my little X-carve to build a bigger and better CNC router.

Building a Shapeoko 3 from Scratch

caleb-peters Caleb Peters

Pavapro is tiny programmer you can bring anywhere. You can load binary file into it and bring/use it as you wish. And a bit more than that.

Pavapro - portable AVR programmer

jaromirsukuba jaromir.sukuba

The Robotic 3rd Hand is worn on the forearm and hands you a tool right when you need it.

Robotic 3rd Hand

The 2016 Hackaday Prize

A tower high 90cm made out of acrylic that lights up with the music or sensing the position of a hand on top of it.

Interactive VU LED tower

PIC32 DMA can send a sine table to a DAC at >3.2 million samples/sec, making low distortion 100 KHz sine waves and using zero cpu cycles.

ZERO CPU load function generator

bruce-land Bruce Land

The 2015 Hackaday Prize

The Redtree Hydra is the 1st computer for robotics designed to easily add components, communicate with groups of other robots and share data

Redtree Hydra: A modular platform for robotics

redtree-robotics Redtree Robotics

The 2016 Hackaday Prize

Here is the lovely tiny LED wall I made with Wio nodes. Every one can control it through the internet.

The Internet Of Led Wall!

Official Hackaday Prize Entry

I'm building a 3d printer which makes things out of steel.

3D Steel Printer

Light effects that follow the music, made of acrylic milled with DIY CNC router

Acrylic light effect tower

WS8212 LED strips embedded in an interactive Christmas Display

Christmas Snowflake Sculpture

nicholas-stedman Nicholas Stedman

A project to develop a small cheap black line follower Robot.

BLF BOT (Black Line Follower)

extreme-electronics Extreme Electronics

View all

Bits