0%

0%

Chris L

Professional Engineer, Machinist, Controls, Automation, PLC, Robots, CNC. Also, Professional Tinkerer, Maker, Husband, Father

NEPA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/30/2020.

Projects I Like & Follow

Hackaday Prize 2019

Blackbox shifts 3D printing towards a multitool manufacturing robot.

Multitool 3D Printer - Blackbox

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

Yet another homebrew computer based on 65C02 CPU

DB6502

using VU Meters to monitor system activity on Raspberry Pi

Audio VU Meters & Raspberry Pi

The Hydrosys4: control system for irrigation based on Raspberry Pi

Hydrosys4 - Irrigation System

Using ESP-IDF to send raw PCM data to a fidget spinner

ESP32 Bluetooth A2DP SRC

132 APA102 LED panels, 680 pixels per panel, 90,000 pixels, 300sqft, 4 Spartan 6 Mojo FPGAs

HDMI to FPGA to APA102

The 2018 Hackaday Prize

Have some old phones lying around? Thinking what to do with them? Here's how you can use them.....!

Convert your old phone into a remote switch

Vishwas Navada B

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

The 2018 Hackaday Prize

Using ninjaflex, I have revived a dead Phillips CD-i

3D printed belt for Phillips CD-i

The 2017 Hackaday Prize

Utilizing 8 accelerometers mounted on 3D printed rings, LOTR gives users the ability to type anywhere and anyway.

Lord of the Rings

The 2018 Hackaday Prize

This robot moves vicariously for a laboratory mouse while its brain is imaged by a microscope!

LabRATory Telepresence Robot

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

In this workshop, we'll make 3 different kinds of origami shapes.

Remoticon: Making Glowy Origami

Complete integration test between the IoT Ubidots platform and the LOGO! by Siemens using Node-RED running on a Raspberry Pi

integration test IoT Ubidots with LOGO! Siemens

RYB080l is a standalone BT module with an extremely small footprint ideal for small IoT connected devices like wearables, we use it today.

RYB080l Bluetooth Tutorial for Wearable device

akarshagarwal98

A modular laptop platform that leverages single board computers into usable laptops

MBF

View all

Bits