Close
0%
0%

MDB

Tea Drinking nerd from the UK

UK
Following
Send a private message
Similar accounts worth following
1 Followers
43 Following
0 Projects
0 Likes
mdb
Send a private message

This user joined on 03/16/2023.

22.2k
6k
9
104
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp
Project Owner Contributor

Pick and place machine - Smoothieboard/OpenPnp

johnJohn

18.7k
161
35
135
Very easy to repeat and inexpensive pocket-sized DIY thermal imager
Project Owner Contributor

DIY pocket thermal imager

ruslanRuslan

13.7k
2k
1
6
Run Stremio on Raspberry Pi with a kiosk look
Project Owner Contributor

Install Stremio on Raspberry Pi

shivasiddharthshivasiddharth

9.9k
3.4k
22
134
RGB LEDs Triangular/Hexagonal Pixels Matrix.
Project Owner Contributor

RGB HexMatrix | IOT Clock

mukesh-sankhlaMukesh Sankhla

9k
5.5k
2
22
Too simple for a project page & which may never happen.
Project Owner Contributor

Silly hardware wishlist

lion-mclionheadlion mclionhead

5.8k
3.4k
8
77
Building a robot car with a smartphone at its heart.
Project Owner Contributor

DeepRC Robot Car

piotr-soklskiPiotr Sokólski

4.8k
308
0
24
Ultimate Presence-Based Room Automation
Project Owner Contributor

RoomSense IQ

sinaSina

4.4k
2.5k
0
25
Wireless USB dongle (868MHz) for home automation to improve the indoor air quality (IAQ)
Project Owner Contributor

Fresh air automation by RF usb dongle

marcelMarcel

3k
2.2k
2
19
An OS boot selector switch based on the Pimorini Tiny 2040
Project Owner Contributor

Tiny 2040 Hardware Boot Switch

william-somskyWilliam Somsky

2.7k
2.8k
0
4
Commander un relais iot avec ESP-01 via SmartThings
Project Owner Contributor

Relais ESP-01 iot sur SmartThings

erik-tellierErik Tellier

2.1k
2k
4
39
Reliable hardware designed by robots
Project Owner Contributor

SOL75 - a 3D customizer

francescoFrancesco

2k
16
11
12
Custom firmware for the CH552 found in those USB RGB macropads with a rotaty knob
Project Owner Contributor

RGB macropad custom firmware

biemsterbiemster

1.8k
825
1
18
In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.
Project Owner Contributor

3D Printed Flying wing FPV Drone

kK+

1.7k
1.7k
0
13
MCL33 Inspired Formula 1 car designed to be the lightest and fasted RC Formula 1 car.
Project Owner Contributor

RC Formula 1 car

elias-marquezElias Marquez

1.5k
1.5k
0
10
A 3d printed enclosure to house multiple Pis, updated for the Raspberry Pi 4
Project Owner Contributor

Raspberry Pi Rack for the Pi 4

dave-peduDave Pedu

1k
1k
0
1
New open source hardware 1U satellite project.
Project Owner Contributor

New open source hardware 1U satellite project.

tranvinhquangTRAN.VINH.QUANG

678
659
0
10
Recreation of the Limrose Compukit 1 from 1970.
Project Owner Contributor

Limrose Compukit 1

deftcoyotedeftcoyote

656
669
0
4
Setting up my old Model B for hardware experiments
Project Owner Contributor

Raspberry Pi breakout board

ken-yapKen Yap

View all

Share this profile

Share

Bits

Send a private message to MDB

Become cool instantly

Create your Hackaday.io profile like MDB and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "MDB", please tell us the reason.