0%

0%

Jason

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/01/2017.

Projects I Like & Follow

The 2017 Hackaday Prize

Raspberry Pi Zero 3D Printed Video Streaming Robot

ZeroBot - Raspberry Pi Zero FPV Robot

Your eyes make the light

Cyborg Eyeball Project

The 2018 Hackaday Prize

An efficient and compact generator that can be coupled with wind turbines or water wheels to produce upwards of 100W

Portal Point Generator

Starting a car with a CR2477 coin cell

Coin Cell Jump Starter

ted-yapo Ted Yapo

Hackaday Prize 2019

The reduction of strain-wave, but using a 'single' stage planetary gearset.

MPRT - Modified planetary robotics transmission

daren-schwenke Daren Schwenke

The 2018 Hackaday Prize

Resumer 3D is on Kickstarter now : https://kck.st/2xQmZYK

Magical box for Resuming 3D Prints automatically.

Hackaday Prize 2019

LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.

LP3D: A fully lasercut kit 3D printer

Hackaday Prize 2019

Very simple Tesla Coil - 3 components only = LED, BUL45D2G transistor and 82K resistor

Easy Open Tesla coil on PCB

The 2018 Hackaday Prize

The mutant offspring of a shake flashlight and a universal remote.

The Undead Remote

Bone conduction glasses to stealthly listen to music

DIY Bone conduction glasses

An open source Pellet Extruder for large format 3D Printing

Pellet Extruder

The 2018 Hackaday Prize

A small, cheap ($2 BOM), open source charger for LIR2032 and 20mm rechargeable coin cells built from an MCP73831.

LIR2032 Coin Cell Charger

jon-thomasson Jon Thomasson

A 3D-printed holder for a spool of wire, with an integrated mechanism to straighten wires as they are pulled off the spool

Wire Spool Holder With Straightener

In this project, I show you how to build a powerful Electric Kart (I call it Hovercar) from a Hoverboard.

How to Convert a Hoverboard Into an Electric Kart

The 2017 Hackaday Prize

The essential input you never knew you needed. Sotto is a portable, wearable, more subtle way for you to text and type on the go.

Sotto: A Silent One-Handed Modular Keyset

The 2018 Hackaday Prize

A tiny, easy to use, hackable, battery-powered, multipurpose wireless repeater

Smallest WiFi repeater / Kortex Xtend Lite /

amine-mehdi-mansouri Amine Mehdi Mansouri

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

Taking a thrift shop printer and a cheap Continuous Ink Supply System kit to make a economical inkjet printer for hackerspace use.

Cheap inkjet printing for hackerspace

cprossu cprossu

View all

Bits

robert wrote 04/16/2018 at 02:23

Hi Jason, Thanks for the like and following # Box for Resume 3D Print automatically

Are you sure? yes | no

Morning.Star wrote 04/23/2017 at 09:52

Thanks for the skull on my antenna project! I'm afraid I've been a bit preoccupied:
hackaday.io/project/19920-cardware/log/57928-the-benefits-of-robots-in-our-society

Are you sure? yes | no

samern wrote 04/20/2017 at 10:44

Thanks for following the GoKart tank. You might consider finding the updated entry as a Hackaday 2017 prize submission and liking it so that I can get ahead in the standings.

Are you sure? yes | no