0%

0%

Dana Harrington

I've been messing around with computers my whole life. Started doing some small code projects in high school. Got more into it when I learned about 3d printers.

Central Florida

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 07/12/2021.

Projects I Like & Follow

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

VFD-equipped personal augmentation platform

Singularitron - Modular Cyberwatch

zack-freedman Zack Freedman

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

learn how to overclock your Raspberry Pi device in a safe and efficient ways for reaching any goal!

Boost your Raspberry Pi in Minutes

A 3D printer for printing with welding wire

Wire 3D Printer

dominik-meffert Dominik Meffert

The 2018 Hackaday Prize

3D Printed Jetson TX2 based robotic lawnmower aims to build an "smart" robotic lawnmower using open technology

Valify V2 Robot Lawnmower

robin-frjd Robin Fröjd

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Raspberry Pi 3B based robot, distance sensors, and ROS.

Wall Following and Obstacle Avoidance

sinclair-gurny Sinclair Gurny

3D-printed chassi for Ardumower

Ardumower Arctic Hare X2

robin-frjd Robin Fröjd

developing a standalone opensource gamepad to fill the gap left by the discontinuation of the Steam Controller, the greatest controller ever

[on hold]projectSpigot

ticktok Ticktok

The 2018 Hackaday Prize

Using an Wemos D1(esp8266), cheap power supply, a switch, and a temp sensor you can automate anything

Home Automation on the Cheap V2

A "Nanodrone" for environmental data collection and a Ground Control PSoC6 to interface the data to the cloud.

Nanodrone For IoT Environmental Data Collection

enrico-miglino Enrico Miglino

An open source magnetic encoder with multiple interfaces and configurations. Designed for robotics and motion control applications.

OpEncoder

Using the built-in reed switch on the mcMod120, we'll show you how to setup a super easy way to be alerted and track opening doors!

Wireless IoT Door Open/Closed Sensor

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

Home Automation using Blynk IR Remote & ESP32

An uninterruptible power supply for Raspberry Pi that can provide more than an hour of backup power and shutdown the Pi safely.

Power PI: A Smart UPS for the Raspberry Pi

View all

Bits