0%

0%

daniel.gelbgras

Electronics engineer interested in LPWAN

Belgium

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/06/2020.

Projects I Like & Follow

The 2017 Hackaday Prize

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Arcus-3D-C1 - Cable 3D printer

daren-schwenke Daren Schwenke

Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!

LadyBug BEEFY: 3D printer motorized microscope

ahron-wayne Ahron Wayne

80W HiFi Audio Amplifer

The 2017 Hackaday Prize

Sightless Navigation And Perception (SNAP) translates surroundings into sound, providing continuous binaural feedback about the environment.

SNAP: Augmented Echolocation

dan-schneider Dan Schneider

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Using ESP-IDF to send raw PCM data to a fidget spinner

ESP32 Bluetooth A2DP SRC

This simple project implements an audio delay and time-shifing VOX using the ESP32S ADC and DAC capabilities.

Audio delay and VOX using ESP32

How to use the UV4L framework to build a two-way audio 3D FPV 720p@30fps video telepresence for the IoT

Two-way audio 3D FPV 720p@30fps video telepresence

Autonomous shutdown with Flip-Flop RS for 3D printer.

3D Shutdown

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

curt-white Curt White

Generally we have only seen drones fly, but how cool would it be if we can maneuver it on the ground as well!

HYBRID DRONE

shivani SHIVANI

The 2017 Hackaday Prize

A smart Bluetooth speaker which has features like 8 pt. FFT Spectrum Analyzer and Weather Monitor

Smart Bluetooth Speaker with Spectrum Analyzer

vishwas-navada-b Vishwas Navada B

Hackaday Prize 2020

We show how to build IOT WiFi Motion Sensor powered on a battery with email notification over IFTTT.

WiFi Motion Sensor (3D print) - DIY

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

YES, naturally my owning MCU has OLED display.

tiny BLE board with OLED

Arduino IDE for Building Compiling Environment of ESP32

Arduino IDE for Building Environment of esp32

Recording my attempt to hack a 4 valve Melnor Digital Water Timer and add IOT functionality to control it remotely

Melnor Water Valve Timer - IOT Hack

isaac-hayes Isaac Hayes

My high school project

Torque controlled robotic arm (2)

jung-hoon-lee Jung Hoon Lee

View all

Bits