0%

0%

Desmond Han

Beginner DIYer

Singapore

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 08/04/2020.

Projects I Like & Follow

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

clyde-d-corpuz Clyde D. Corpuz

The 2017 Hackaday Prize

This project focuses on using building a budget powder bed 3d printer capable of printing bones, and creating the needed ink and powder.

Printing bones on a DIY powder bed 3d printer

How to design your own HAT module including ID EEPROM.

Designing a Raspberry Pi HAT

jon-buford Jon Buford

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

Hackaday Prize 2020

a safe, low-cost IV fluid warmer solution; for when commercially available IV fluid warmers are too expensive or cannot be sourced

OpenFluidWarmer

john-opsahl John Opsahl

Use your Raspberry Pi to "convert" your WiFi connection to wired. Use your old router as access point with Ad-Blocking.

Raspberry Pi route WiFi through Ethernet

Dimitris Matsoukas

Stuck between the choice of mobile, low power VR and stationary, PC grade escapism, the best choice was clearly to mash the two together.

Upgrade-Ready Virtual Reality Backpack

24-bit stereo DAC which is specially built for Raspberry Pi boards. This R-2R DAC delivers the clear audio output with minimum configuration

24-bit Stereo Audio DAC for Raspberry Pi

dilshan-jayakody Dilshan Jayakody

The 2017 Hackaday Prize

A portable Raspberry Pi that you can access with your smartphone and use as a Bluetooth receiver to stream music to a pair of speakers.

Portable Raspberry Pi Bluetooth Receiver/Player

Hackaday Prize 2020

A UV light curing chamber made with an old rack, some aluminum foil, and three 50W UV LEDS. An Arduino is used as a programmable timer.

UV Curing Chamber

andrs-lopez-pulzovan Andrés Lopez Pulzovan

I will test the usability of the RF Explorer 3G+ IoT module from seeedstudio

Basic spectrum analyser with RF Explorer 3G+ IoT

dorijan Dorijan

2021 Hackaday Prize

Alarm clock with ramp-up light and music to get you out of bed on cold winter mornings

Sunrise Alarm Clock

the-big-one The Big One

Hackaday Prize 2019

Place windows apps to a limitless 3D Virtual space. Use an android based 3D Headset for viewing. Controll it with a 5 button mouse.

VR Prelimutens 3D Desktop

gabor-horvath Gabor Horvath

A project for my grandchildren to first build line-following robots then convert them to being controlled by their phones and tablets.

IP control for inexpensive line following robots

This smart relay can sense the room temperature and sunlight to turn on and off the fan and light bulb. You can monitor the same from mobile

IoT Based Home Automation With Blynk and NodeMCU

This unit allow you to route a audio signal through a switching system and distribute it to various speakers.

6 Channel speaker selector

dilshan-jayakody Dilshan Jayakody

Binky is a music box built for the 3rd anniversary of my daughter. It's designed to let her play music by herself with use of NFC cards.

Binky - Kid's Music Box

The device can be used as an effective visual detail within a DIY amplifier or preamlifier

DIY audio signal spectrum analyzer

mircemk mircemk

View all

Bits