Close
0%
0%

daivid

Following
Send a private message
Similar accounts worth following
1 Followers
57 Following
0 Projects
0 Likes
daivid
Send a private message

This user joined on 04/11/2017.

218.5k
6.8k
186
1.1k
Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.
Project Owner Contributor

ODrive - High performance motor control

oskar-weiglOskar Weigl

43.1k
367
8
68
Building a 6-axis robot based on the Thor robot. When size DOES matter!
Project Owner Contributor

Building the Thor robot

olaf-baeyensOlaf Baeyens

25.8k
538
20
134
We are updating the microscope using open source materials to make microscopy accessible globally
Project Owner Contributor

Internet of Things Microscope

arch-reactorArch Reactor

25.4k
124
0
87
An adjustable Bench PSU constructed out of salvaged parts and minimal circuitry
Project Owner Contributor

Mini Bench PSU

tron9000Tron9000

6k
2k
3
35
A standalone, open-source thermal imager which can be built for under $50 in parts.
Project Owner Contributor

LCIRIC - Low Cost Infrared Imaging Camera

josh-langeJosh Lange

4.9k
3.2k
2
10
Given Windows with some version of Arduino installed, set the paths to allow using avr-gcc/etc from the command line.
Project Owner Contributor

install-avr-tools

westfwWestfW

4.3k
2.5k
1
8
Yet another IR-blaster, but this time with CEC (and WIFI)
Project Owner Contributor

IR-blaster with CEC

myles-eftosMyles Eftos

3.9k
638
6
51
A Solar powered WiFi development platform, based on STM32 and ESP32, a descendant of the tech behind SunLeaf
Project Owner Contributor

Vento

avrAVR

3.5k
2.1k
2
15
I use various parts from Lego optics lab to build a laser interferometer
Project Owner Contributor

Lego Optics Lab: Laser Interferometer

steve-schulerSteve Schuler

3.1k
3.1k
6
23
Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.
Project Owner Contributor

3D Printed Chamfer Tool

alex-richAlex Rich

2.3k
2.3k
13
28
a Forth for interactive hardware design on the PSoC 5LP
Project Owner Contributor

gelFORTH

andreasAndreas

2.3k
136
0
3
Communicate between Internet of Things projects with Blynk Bridge
Project Owner Contributor

Blynk Bridge tutorial with ESP8266

geekstipsgeekstips

1.3k
382
0
2
SMART LED FLASHLIGHT - a tiny personal emergency Light sensing LED flashlight, made from available components and very simple for replicate
Project Owner Contributor

Light sensing LED flashlight

httpwhite-robotcomhttp://white-robot.com/

1k
1k
0
8
Sterile 3D printing of ventriculoperitoneal shunt valve and other components in developing countries
Project Owner Contributor

3D Printed Tesla VP Shunt Valve

sohum-desai-mdSohum Desai MD

1k
1k
0
11
Internet of Things development board with LoRa communication
Project Owner Contributor

Marvin: Plug&play IoT development board

niels-stamhuisNiels Stamhuis

667
718
0
3
ayPI is a AY-3-8910 Audio Chip Shield for raspberry PI
Project Owner Contributor

ayPI

runar-borgeRunar Borge

577
252
1
5
Use NodeCode Studio and a Twitter Service to send a tweet when motion is detected using a PIR sensor
Project Owner Contributor

Send a Tweet From Raspberry Pi GPIO Pin

james-thomasJames Thomas

177
464
0
2
Restoring function to partial hands. Internationally, birth defects and amputations limit human potential. Let's fix that!
Project Owner Contributor

Finger it out!

daniel-r-duganDaniel R. Dugan

View all

Share this profile

Share

Bits

Send a private message to daivid

Become cool instantly

Create your Hackaday.io profile like daivid and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "daivid", please tell us the reason.