0%

0%

Doc

Amateur radio operator IT specialists Network Engineer

Russia, Moscow

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/15/2022.

My Projects

The work of network IT engineers. There is always an urgent need to test LAN Networks. Laptops and tablets are very bulky. Here was such an

Ethernet TESETER

Device for measuring temperature in server rooms

SNMP Environmental Monitor V2

Projects I Like & Follow

The 2016 Hackaday Prize

Over the last 10 years or so my personal home automation controller has grown and grown.

Home Automation Console.

The 2017 Hackaday Prize

RGGBer is a FPGA based complete development kit dedicated to embedded vision

RGGBer - open hardware for embedded vision

Jie Zou Jie Zou

The 2018 Hackaday Prize

Using an esp8266, arduino nano, a salvaged usb power supply, and a couple relays you can automate anything

Home automation on the cheap

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Official Hackaday Prize Entry

Home automation system with video surveillance that indicates state by tweet.

Home automation system with Twitter

A open source tool that aids in the learning of the sky map in amateur astronomy.

Galileo's Finger

RISC-V is a free, open general-purpose instruction set architecture developed at UC Berkeley, designed to be flexible and extensible.

RISC-V Instruction Set Architecture

An FPGA implementation of the Manchester Baby or Small Scale Experimental Computer.

BabyBaby or Extremely Small Experimental Computer

Supplyframe DesignLab: 2022 Hackada…

Wireless USB dongle (868MHz) for home automation to improve the indoor air quality (IAQ)

Fresh air automation by RF usb dongle

A MIDI controller with arcade push buttons and 32 RGB LEDs

MIDI Fighter

Dog chewed up old remote so I painstakingly designed and 3d printed a new case.

Chewed up remote repair

how to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

Home Automation Using Blynk & ESP32 IoT Project

The 2017 Hackaday Prize

Use GPG, a Raspberry Pi and a ESP8266 to safely store your passwords - soon with GnuPG Smart Card support

hardpass0.2: hardware passwd manager w/ smart card

In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.

Arduino ESP8266 Control Relay with Blynk & IR

A cheap 3D Printed Centrifuge bit that can attach to any rotary tool to do cool biology.

miniFuge

This post explains how to control a Nikon D3100 DSLR, and then get the images off of it.

Remote control and image retrieval from Nikon DSLR

sciencedude1990

Synth Engine Explorer

Teensy Synth and Display

Make IoT-based Smart Home Automation Using Alexa & ESP32 control relays from the IR Remote, manual switch & Wi-Fi with real-time Feedback.

Alexa Home Automation using ESP32 & IR Remote

View all

Bits