0%

0%

John M. Owen

Designing data and systems is my groove, I seek the Singularity.

Tucson, Arizona

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 09/23/2016.

Projects I Like & Follow

Hackaday Prize 2020

A completely automated way to take photo's and convert them into a 3D-object

Arduino controlled photogrammetry 3D-scanner

Single rotor, "singlecopter", selfmade drone with air vanes for position control as a full remake of the Ball-Drone Project

The Ball-Drone Project MK II

Benjamin Prescher

Hackaday Prize 2019

Blackbox shifts 3D printing towards a multitool manufacturing robot.

Multitool 3D Printer - Blackbox

Testing and development of a system to cut traces on a blank PCB using electro-discharge machining with pencil lead

PCB Fabrication with EDM

alpha and beta instead of x and y

Dual-Disc Polar Printer

FPGA Running RISC-V Core in a Game Boy form factor

2019 Hackaday Superconference Badge

Hackaday Prize 2020

MABEL (Multi Axis Balancer Electronically Levelled) is a unique arduino/Raspberry Pi self balancing robot with movable legs.

MABEL - A Boston Dynamics inspired balancing robot

2021 Hackaday Prize

A jumperless breadboard

breadWare

Kevin Santo Cappuccio

Hackaday Prize 2020

Inspired by the snorkel mask repurposed for a ventilator, I added filter material instead to make some serious Personal Protection Equipment

Filtered Face Mask

A Cortex-M native code Forth along with an RTOS

zeptoforth

Easily document cables and wiring harnesses

WireViz

Use a (D)SLR to "scan" analog film negatives and positives with 3d printed holding frame.

Scan analog film. For the very last time.

Hackaday Prize 2020

Soldering is fun but soldering fumes are dangerous! Use an open source smart fume extractor and control it remotely to stay healthy.

Open Source Smart Solder Fume Extractor

Big J is a five bar parallel robot that uses direct drive brushless motors as actuators working with the Janus Controller board.

Five Bar Parallel Robot - Big J

I've always wanted to build a project that *needs* the million outputs of an FPGA, and well, this is it. An audio "camera".

256-Element Beamforming Microphone Array

base on electromagnetic pump

Mini Selective solder machine

Microchip AN2434 explains how you can use an ATTiny to build a 2.5MHz quadrature encoder counter. This is a demo board for that.

TinyEncoder

A respirator that fits 5P71 filters (P95 rating) and 5N11 filters (N95 rating). TPU face mask and PLA filter housing.

3D Printed N95 Respirator

View all

Bits

Kris Winer wrote 08/20/2018 at 23:15

Thanks for following my MAX32660 Motion Co-Processor project!

Are you sure? yes | no