0%

0%

Henrik Johansson

Software and hardware developer

Sweden

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/26/2020.

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

A tiny homemade radio telescope I built which can take pictures IN RADIO... i guess i was just bored

Tiny Radio Telescope

gonalo-nespral Gonçalo Nespral

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-woo Timothy Woo

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion-mclionhead lion mclionhead

The 2018 Hackaday Prize

Robotic platform for water quality sensors inspired by clams.

Open Source Underwater Distributed Sensor Network

michael-barton-sweeney Michael Barton-Sweeney

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

Replacement PCB for TS100, adds USB-C PD to every hackers favourite tool!

Otter-Iron - TS100 USB-PD hardware mod

jana-marie Jana Marie

Generic prototyping of processors from 1970's and 1980's

Generic 8-bit Processors Prototype (G8PP)

A MIDI controller with arcade push buttons and 32 RGB LEDs

MIDI Fighter

Using some of the newest GPS tech from u-blox, you can add global positioning to any Adafruit Feather!

u-blox NEO-M9N GPS Featherwing

An OpenSCAD library for parametrically generating ABLOY PROTEC keys suitable for 3D printing

Protec 3D Printing

tiernan Tiernan

My take on an autonomous satellite image collector grabbing from NOAA 15/18/19. (Leave Behind - Collection Device)

NOAA LB-CD

nate-schroeder Nate Schroeder

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

An open source, Arduino-based oceanographic instrument for salinity, temperature, and depth.

Arduino-based CTD

ian-black Ian Black

I got a Prusa MK3s printer kit, assembled it, and it worked the first time.

Prusa MK3s Build - my first 3D printing experiance

patrick Patrick

A follow-up tutorial to Pi Project 001, where a RAM Copper Heatsink is now added to the back of the Raspberry Pi, providing greater cooling.

Raspberry Pi RAM Copper Heatsink Setup

ESP32 with mpu6500, bmp280, qmc5883 and OLED display.

ESP Handheld IMU

markwarrenee markwarren.ee

View all

Bits