0%

0%

Gani Martins

I am A robotics engineer with experience in additive manufacturing, Artificial Intelligence and programming.

Abuja, Nigeria

Following Follow me

Similar accounts worth following

This user joined on 09/30/2020.

Projects I Like & Follow

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

Quick way to start with MCUs

Adventures with a STC89C52 development board

ken-yap Ken Yap

Hackaday Prize 2019

Armed with a Nerf blaster. This turret tracks and shoots down micro drones, otherwise know as "Tiny Whoops"

Anti Drone Gun Turret

drew-pilcher Drew Pilcher

My second generation TDR which aims to be standalone (no oscilloscope) and as cheap as possible while being usable.

Standalone digital TDR (TDR-G2)

ms-boss MS-BOSS

M-Bus Shield for smartmetering with Arduino MKR

Arduino M-Bus Master Shield

An Arduino controlled infinity mirror mask. You can even see while wearing it!

Infinity Mirror Scuba Mask

curt-white Curt White

ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.

IOT ModbusBox

Super IMU

laetitia-bel Laetitia BEL

How you can get multi-connect and remote access to USB Dongle

Donglify - Share USB Key Software

Hackaday Prize 2020

An innovative, non-invasive, assistive Human Interface Device for ALS affected people based upon Electrooculography (EOG) technique.

EyesDrive - Steering with eyes movement

federico-runco Federico Runco

This smart relay can sense the room temperature and sunlight to turn on and off the fan and light bulb. You can monitor the same from mobile

IoT Based Home Automation With Blynk and NodeMCU

Tired of plays your genesis games using a wired joystick ? in this project, i'm show how i create a wireless interface to plays in my bed

A DIY Bluetooth Sega Genesis/Mega Drive Joystick

danilo-almeida Danilo Almeida

Recording my attempt to hack a 4 valve Melnor Digital Water Timer and add IOT functionality to control it remotely

Melnor Water Valve Timer - IOT Hack

isaac-hayes Isaac Hayes

The main goal of this project is to design a Voice-Controlled Home Automation System without replacing the existing Switchboard.

IoT at just 7$ in your existing switchboard

IRIS2 is a followup of IRIS project. It's a complete project of Raspberry Pi based Internet Radio with own 2+1 AMP HAT and spectrum analyzer

IRIS2 Internet Radio

An excellent project for location tracking involving a Ublox sensor and an Arduino, which can be used for many portable devices.

Arduino Ublox Neo-7N GPS Module Project

AM RADIO - To build a one I.C AM Radio

AM RADIO

adesh-manhar-ramkissoon adesh manhar ramkissoon

As Joystick is the game controller it is used in applications like DIY electronics

Interfacing Joystick with Arduino

hiotron hIOTron

View all

Bits