0%

0%

JS

Interested in CNC machines, embedded systems, sensors, robotics,...

Slovenia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/14/2016.

My Projects

The 2016 Hackaday Prize

Distance measurement using 2 cameras and triangulation

Distance measurement with 3D camera

The 2017 Hackaday Prize

Force sensor that measures forces in X, Y and Z direction.

3-axis force sensor with gravity compensation

Projects I Like & Follow

The 2015 Hackaday Prize

A inexpensive modular tank track system that can be used for robotic and radio controlled vehicles.

Modular Continuous Track System

jupdyke jupdyke

Make a smart garage door opener using an Arduino Yun and OpenHAB

Arduino openHAB Garage Door Control

pete-hoffswell Pete Hoffswell

Bridging the gap between professional and DIY/hobbyist bench power supply

DIY programmable (SCPI) bench power supply

B3606 is a cheap MCU controlled power supply, I'm reverse engineering it and writing software to add serial port and more features.

Power Supply B3603 Alternative Firmware

baruch-even Baruch Even

Vortex cannons are a device that fires doughnut-shaped air vortices.

Vortex cannon using capacitor discharge

robert-hart Robert Hart

Clueless, broken robots thrive on Genetic Algorithms and Procedural Generation

IQ Zero: Evolving Unprogrammed Robots

die-master-monkey Die, Master Monkey!

The 2017 Hackaday Prize

Original design v-tail quadcopter, all pieces 3D printed. 2213 935kv motors running 10.5 inch props with a 4400mah battery.

Raptor V-Tail Quadcopter Drone

Use a Raspberry Pi as an Access Point where traffic is "tor-ified"

Raspberry Pi Tor Box

grgory-paul Grégory Paul

The 2015 Hackaday Prize

This project aims to bind all IoT devices together in a single unified voice controlled interface.

Voice controlled connected home

µC with 8 cores that runs a single stream of code (ideally) 8 times faster (in contrast to classical 8 streams with normal speed)

Serial Multicore Mikrocontroller

iBeacon mode and more on the MetaWear

MetaBeacon

This project aims to design an efficient hardware Mandelbrot Set calculation engine, and dynamically render it based on FFT audio analysis.

Let Mandelbrot Set "Dance" with Music

wancheng-zhou Wancheng Zhou

controller board for up to 18 Servos controlled by i2c or UART

SERVOcontrol

One of the main wrong uses of technology is through the violation of privacy .

Detector drones and its deactivation.

jose-pedro-r-a-ribeiro Jose Pedro R. A. Ribeiro

The 2015 Hackaday Prize

A 3d printed socket that will allow for on-location calibration of replacement arms.

Calibrated Prosthetic Socket for 3D Printed Arms

daniel-r-dugan Daniel R. Dugan

The following shows how to get root access to the kindle pw2 shell by using the serial port (console).

Kindle Paperwhite 2 (Root Access)

jonathan-cline-ieee Jonathan Cline IEEE

A Trinket watch with a combonation of buttons that makes your phone "ring."

Trinket Binary Watch Scapegoat

Internet of Things on Android Wear

CleverObjects

jordan-rjaud Jordan Réjaud

View all

Bits