0%

0%

Frazer Boorman

I replicate stuff

United Kingdom

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/09/2021.

Projects I Like & Follow

The 2016 Hackaday Prize

A project about Home Automation. I want to replace my old thermostat with an IoT ESP8266 + OLED 128x64 Screen + OpenHab + MQTT + Micropython

Home automation: thermostat with ESP8266 & OpenHab

A simple point-and-shoot near-IR camcorder built with a raspberry pi

Near-IR Camcorder with a Raspberry Pi

The 2017 Hackaday Prize

DABDUINO is DAB/DAB+/FM Arduino shield with 32-bit, 384kHz PCM DAC (cinch) + SPDIF/Toslink optical digital audio output

DABDUINO - DAB/DAB+/FM Arduino shield

turbyho Turbyho

The 2018 Hackaday Prize

Resumer 3D is on Kickstarter now : https://kck.st/2xQmZYK

Magical box for Resuming 3D Prints automatically.

Hackaday Prize 2020

for demonstration of physical laws in generating electrical energy using hydropower plant

3D printed hydroelectric power plant model

matic-markovi Matic Markovič

I explain a concept for an active (motorized) omni-directional treadmill that is cheaper and easier to build than most others

A Cheap Active Omni-Directional Treadmill

finallyfunctional

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

A mesh network is a network in which the devices -- or nodes -- are connected so that at least some, and sometimes all, have multiple paths

Smart Music Player using LoRa Mesh Network

ATtiny84-based gamed of life on 8x8 LED matrix with manual setup of 1st generation.

Conway's Game of Life on ATtiny84

jean-franois-poilpret Jean-François Poilpret

Open source libraries, software, and firmware that can emulate the behavior of different conventional laboratory instruments on FPGA boards.

Reconfigurable virtual instrumentation with FPGA

miguel-risco-castillo Miguel Risco-Castillo

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

A multi-track, multi-layer Audio Looper for use in a iive Guitar performance setting running on an rPi in bare metal with a 3D printed case.

rPi Bare Metal Audio Looper

patrick Patrick

Cheap surveillance cameras often have a poor quality. If you have a small budget you should look at this project.

Surveillance camera out of a notebook cam

Final year project for Uni.

Portable Espresso machine

The 2017 Hackaday Prize

An immersive video experience allowing users to experience multiple POVs in real time, swapping channels through head movement.

FEED

experimental 2-player musical instrument

Dual Instrument

jason-cho Jason Cho

This is my build log of Jubilee 3D Printer, I will tell anything about what have done one by one on this build log

My Build log : Jubilee 3D Printer

handika Handika

Pi Zero as a host to do In-Circuit Serial Programming of AVR’s

ICSP

ronaldsutherland ronald.sutherland

View all

Bits