0%

0%

Garthe

y

Natternbach

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/19/2015.

Things I've Built

Stirling engine

a small stirling engine. It is made out of a can and waste, but it works.

Raspberry pi Robot

A robot that is controlled via wlan, Raspberry pi is connected to an arduino uno.

Projects I Like & Follow

The 2018 Hackaday Prize

An open-source, 3D printed, high precision robotic arm with trainability

Dexter

haddington-dynamics Haddington Dynamics

The 2015 Hackaday Prize

After the apocalypse we have to build computers from stuff we can make at home, I.E Transistors, diodes and resistors.

AYTABTU - Discrete Computer

matseng matseng

Experimental high power rocket with active stabilization, live telemetry, autonomous GPS guided recovery and HD video

High Power Experimental Rocket Platform

j-m-hopkins J. M. Hopkins

The 2018 Hackaday Prize

This bionic hand uses an arduino nano V3 to controll 7 servo's. The hand is modelled after my hand so I could make a mold that fits over it.

robot hand || bionic hand prosthesis prototype

brian-brocken Brian Brocken

An improved version of my first gauss rifle.

Gauss rifle v2.0

The 2015 Hackaday Prize

Project EDEN is an open initiative to grow crops quickly, under near-optimal conditions with automated aeroponics habitats.

Project EDEN

sadhana sadhana

The 2015 Hackaday Prize

open source circular knitting machine replicable with digital fabrication and makers' tools.

Circular Knitic

varvara-guljajeva varvara guljajeva

Robotic platform designed to operated in harsh conditions experienced in outdoor environments. Modular with easy to replace components.

Expandable Ruggedized Robotic Platform

Wireless device for monitoring bioelectric signals, e.g. ECG or EEG (brainwaves)

Biomonitor

marcin-byczuk Marcin Byczuk

Low cost 3D printer that uses drawer runners for linear bearings with no laser cut or 3D printed parts. Large print volume and good quality

Low cost 3D printer that uses drawer runners

jonathan-irwin Jonathan Irwin

I build a walking biped robot using the Smart Servo Controller.

Walking Robot

mark-arnott Mark Arnott

The 2015 Hackaday Prize

UP1 robotics platform, bringing robotics to everyone

UpDroid's UP1

kartik-tiwari Kartik Tiwari

All of the things needed to have an electronics lab on the road.

Portalab

chris-gammell Chris Gammell

Motorizing and increasing the capacity of a 3D-printed compost shredder

Compost Shredder Upgrade

Because launching rockets with a string just didn't feel right

Computer Controlled Bottle Rocket Launcher

Daniel Vlahovic

The 'Boom box' is made out of 3 disposable camera's and delivers more than 2kV and about 10 amps.

'BOOM box' High voltage capacitor bank

brian-brocken Brian Brocken

Making of my Plywood Quadcopter.

The "Woodcopter"

hebel23 hebel23

The 2015 Hackaday Prize

No more monsters under your bed! Bodo is a stuffed animal glowing in the dark whenever you hug him.

Antimonster Bodo

julia-dressler Julia Dressler

View all

Bits

ProtoVoltaics wrote 07/30/2015 at 11:36

Thanks for following our Pick and Place project!

Are you sure? yes | no

Frederico Sobreira wrote 07/24/2015 at 14:42

Hi Garthe! Thanks for following us! ^_^

Are you sure? yes | no