0%

0%

giorgio

electronic designer

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/11/2016.

My Projects

The 2018 Hackaday Prize

Your prototipe need an actualization ? Make custom project cost much ? PLC is too much expensive ? Only 41 Euro

GEVINO opto PLC arduino zero

Single board, with TFT, CPU, optocopuler input and output, and more module

GEVINO TFT 7"

Arduino zero SAMD, CPU, relay, module.

GEVINO CIVILE

GEVINO input output shield arduino ZERO LINbus power wifi bluetooth gsm sd tft

GEVINO ZERO

Projects I Like & Follow

Official Hackaday Prize Entry

The open source 3D Printable Raman Spectrometer using a RaspberryPi and easy to find off the shelf components..

ramanPi - Raman Spectrometer

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

I love to program programmers. Yo dawg...

Microchip PIC Arduino based programmer

jaromirsukuba jaromir.sukuba

The 2016 Hackaday Prize

Using an open source platform to investigate the "readiness potential" and what it says about human free will

Arduino, EEG, and Free Will

patrick-glover Patrick Glover

Multichannel audio systems based on BeagleBone. Compatible to Linux and Bela's hard real-time environment. In Stock at Shop.Bela.io

CTAG FACE and BEAST Multichannel Audio Systems

henrik-langer Henrik Langer

Hackaday Prize 2019

Ardunio-Compatible M0/Zero/SAMD21 with FET Driver, MOSFETs, Absolute Magnetic Encoder, USB and RS485 comms. ~$US50

Brushless Actuator (Arduino-Compatible)

paul-gould Paul Gould

good looking and clever 4-legged robot

Dizzy Wolf

Can we build a great board for under $400 in less than 3 weeks? (using a few pre-made kit parts)

Electric Longboard

Syma X5C Drone meets DJI FC40 WiFi 2.4GHz Camera bringing FPV to a cheapest level

Restyled Syma X5C Drone FPV Mod

Official Hackaday Prize Entry

The Sugarcube is a portable controller powered by Arduino that allows you to interact with MIDI and audio in playful and intuitive ways.

Sugarcube - a tactile music controller

The 2016 Hackaday Prize

Open Source interface to connect LCD's (5" and 7") to any Board/Micro-controller using HDMI and SPI

OLI (Open LCD Interface)

joe-mendia Joe Mendia

An attempt to build a digital version of John Alexander's cheap STM design!

Scanning Tunnelling Microscope

Be able to make & upload MagSpoof with variable tracks, to use it without Arduino dependencies, and implement it on the same Raspberry GPIO.

MagSpoofPI

salvador-mendoza Salvador Mendoza

Raspberry-Pi smartphone

esme-kealoha-dudoit Esme Kealoha Dudoit

Computer which can use in the car with all the features,and performance. Specially this PC has works with Automobile 12v or 24v DC power.

Mobile Car Computer

From farm to table

Arduino RC airplane

imagine waiting for the bus and finding a headphone jack on a strange sculpture. what would it say?

Guerrilla MP3 Player / Audio Street Art

mpinner mpinner

Using a fully 3d-printed two-axis rotational stage, an arduino and a camera to produce accurate 3D Models

High Quality 3D Scanner (<100€)

View all

Bits