Close
0%
0%

Glenn

Hardware engineer who tries to make everything

San Francisco, CA
Following
Send a private message
Similar accounts worth following
1 Followers
31 Following
0 Projects
0 Likes
glenn
Send a private message

This user joined on 11/18/2021.

20.9k
5.5k
16
135
Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.
Project Owner Contributor

3D scanner

jolarJolar

13.5k
3.6k
6
88
A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance
Project Owner Contributor

3D Printed Robot Joint with Active Compliance

tim-wilkinsonTim Wilkinson

11.3k
6k
9
30
Use a Kodak projector and DSLR camera to automate digitizing slide photography
Project Owner Contributor

Kodak Slide Projector Scanner

bryan-howardBryan Howard

11.2k
1.6k
12
76
the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!
Project Owner Contributor

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

igorIgor

8.8k
1.5k
2
42
Atltvhead is a mashup of interactive art and wearable technology with a message of positivity and encouragement to let your oddities shine!
Project Owner Contributor

ATLTVHEAD

atltvheadatltvhead

7.8k
6.9k
6
65
Use the actual Sega Genesis sound chips to play chiptune files!
Project Owner Contributor

Sega Genesis Native Hardware Chiptune Synthesizer

jareklupinskijareklupinski

7k
25
11
22
Fully manual twin-lens reflex instant film camera
Project Owner Contributor

L2 Camera

vladimir-gorsheninVladimir Gorshenin

5.2k
5.1k
1
21
A hardware and software balancing cart pole.
Project Owner Contributor

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zuckerPhilip Zucker

3.1k
2.9k
1
11
A first attempt for a small, attractive and practical soldering station, a project designed not by the cost but rather the experimentation.
Project Owner Contributor

AVR Soldering Iron

manosManos

3k
3.1k
0
17
For everyone who wants to develop ATtiny10 on Arduino IDE
Project Owner Contributor

ATtiny10 Dev Environment on Arduino IDE

kimio-kosakaKimio Kosaka

2.6k
2.6k
1
28
A 20 character retro-display word clock in 5 minute increments
Project Owner Contributor

Five minute clock

jfJF

2.5k
2.5k
0
22
The smallest DIL40 8085-based computer
Project Owner Contributor

SDC_85

gbmgbm

2.3k
804
2
7
A project to understand and repurpose a low cost night vision IP camera.
Project Owner Contributor

iNite Night Vision Camera Reverse Engineering

graham-bralyGraham Braly

2.1k
1.9k
1
15
This is the second version of a device I designed to alert me in the unfortunate event the nozzle clogs. It communicates with the printer!
Project Owner Contributor

3D Printer Clog Detector V2

elite-wormElite Worm

1.9k
1.1k
3
10
Get notified when your washer and dryer finish.
Project Owner Contributor

Easy Laundry Monitor

adam-demuriAdam Demuri

1.9k
1.9k
2
10
Tea Steeping robot that starts a timer when cups are filled with hot water and lifts bags automatically to make perfect tea every time.
Project Owner Contributor

ChaiBot

adrianAdrian

1.1k
1.2k
0
3
In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.
Project Owner Contributor

IOT Based Pulse Oximeter Using Esp32

nextpcbNextPCB

434
462
0
11
A simple 3D printed model which helps students with cerebral palsy draw and paint.
Project Owner Contributor

Adaptive Drawing Device

christopher-sweeneyChristopher Sweeney

View all

Share this profile

Share

Bits

Send a private message to Glenn

Become cool instantly

Create your Hackaday.io profile like Glenn and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Glenn", please tell us the reason.