Close
0%
0%

Paul

Embedded & IoT engineer turning ideas into smart solutions with AI on microcontrollers

Armenia
Following
Send a private message
Similar accounts worth following
2 Followers
17 Following
9 Projects
paul
Send a private message

This user joined on 04/29/2025.

59
7
0
9
An AI-powered voice assistant designed for the Elecrow CrowPanel Advance. It enables real-time communication with OpenAI models via WebRTC
Project Owner Contributor

Open AI Terminal on CrowPanel Advance

paulPaul

98
5
1
8
Hands-free access. Just say the code out loud, and the lock opens. Without Internet.
Project Owner Contributor

Autonomous Voice-Activated Electromagnetic Lock

paulPaul

131
3
0
5
A ready-to-use weather station. Quick setup: flash the prebuilt firmware and start testing in under a minute.
Project Owner Contributor

Simple Weather Station on CrowPanel Advance

paulPaul

118
3
0
4
Voice-controlled robot interface using CrowPanel Advance and OpenAI.
Project Owner Contributor

OpenAI Robot Control Via Crowpanel

paulPaul

3
0
2
A weather station that talks, powered by real on-device neural speech. Build it once — then make anything you want speak.
Project Owner Contributor

Hear Your Weather — Talking Weather Station

paulPaul

1
0
2
Your pictures don’t just sit there anymore — they speak. Add short captions to your family album, and turn them into natural voice
Project Owner Contributor

TinyTTS — The Neural Module That Makes Photos Talk

paulPaul

View all 9 projects

Things I've Built

Open AI Terminal based on Elecrow CrowPanel Advance

It enables real-time communication with OpenAI, providing hands-free interactions. A user asks a question or speaks a phrase using the microphone embedded in the CrowPanel. The audio is transmitted to OpenAI, where it is recognized. The recogni

Autonomous Voice-Activated Electromagnetic Lock

An AI-powered voice-activated electromagnetic lock system built on the GRC AI DevBoard for hands-free access control.

104.5k
1,504.9k
75
2.4k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

62.7k
12.2k
33
292
An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.
Project Owner Contributor

OpenExposer

mario-lukasMario Lukas

53.1k
7.1k
30
199
FREE and Open Source, Arduino Due based Telescope Control GOTO
Project Owner Contributor

rDUINOScope Boiana

dessislav-gouzgounovDessislav Gouzgounov

33.9k
7.5k
2
108
3D Printed components and other hardware to make a PCB routing machine, which inherently can do other things.
Project Owner Contributor

3D Printed PCB mill

dteelDTeel

21.4k
11.4k
3
40
A sketch to turn your Arduino into a 4MHz 6 channel logic analyzer.
Project Owner Contributor

Arduino Generic Logic Analyzer

andrew-gillhamAndrew Gillham

21.2k
8.6k
0
33
BBC Micro:Bit connected to LoRaWAN network
Project Owner Contributor

JUST DO IoT

richardibbotsonrichard.ibbotson

17k
6.6k
9
109
Pavapro is tiny programmer you can bring anywhere. You can load binary file into it and bring/use it as you wish. And a bit more than that.
Project Owner Contributor

Pavapro - portable AVR programmer

jaromirsukubajaromir.sukuba

15.5k
11k
33
90
This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).
Project Owner Contributor

A new high accuracy tilt sensor

aron-molnarAron Molnar

13.3k
11.2k
0
27
This is an open source hardware, i made for use of build CNC printers.
Project Owner Contributor

Arduino CNC Shield

brijesh-sondarvaBrijesh Sondarva

10.1k
8.9k
0
25
The device that allows to turn on/off two pairs of the outlet sockets via Web browser through Wi-Fi. Based on ESP8266 and Arduino Mini.
Project Owner Contributor

IoT Power Strip

dev-labdev-lab

9.3k
8.4k
3
9
Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.
Project Owner Contributor

Solar & supercap charged LoRaWAN IoT device

pmbnlPMBNL

8k
7.5k
17
46
I have made a new image processing software (LAPTouch) that can convert your conventional laptop or desktop screen into touchscreen
Project Owner Contributor

"Laptouch" Turn normal screen into touch screen

hanifalisohaghanifalisohag

7.9k
6.5k
10
91
Tomographic scanner using my X-Ray machine, a simple motor to rotate the object and a reconstruction software
Project Owner Contributor

X-Ray CT Scanner

francisco-piernasFrancisco Piernas

6.4k
6k
7
41
A self-igniting candle implemented using AVR and PIC microcontrollers
Project Owner Contributor

AVR vs PIC: The case of the candle

thierryThierry

5.6k
5.3k
6
58
A robotic hand based on FESTO's fin gripper fingers
Project Owner Contributor

Adaptive gripper

malte-ahlersMalte Ahlers

5.5k
5.5k
2
12
Given Windows with some version of Arduino installed, set the paths to allow using avr-gcc/etc from the command line.
Project Owner Contributor

install-avr-tools

westfwWestfW

5.2k
5.2k
25
12
Use your Wemos motor shield with steppers motors I2C custom slave interface
Project Owner Contributor

WEMOS Motor Shield firmware for steppers (I2C)

angeloteAngelote

2.3k
3.4k
3
37
Lumos mimics the natural light of the Sun in order to regulate sleep-inducing hormones & improve sleep using Machine Learning
Project Owner Contributor

LUMOS: Smart Lamp for Better Sleep

jontyJonty

View all

Share this profile

Share

Bits

Send a private message to Paul

Become cool instantly

Create your Hackaday.io profile like Paul and many others

Report user as inappropriate

You are about to report the user "Paul", please tell us the reason.