0%

0%

HIGHVOLTOMANIAC

I'm an electrical engineering student in Canada

Ontario, Canada

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/26/2022.

My Projects

A bluetooth musical tesla coil, but fully on a pcb, NO COILS, and also only powered by one 12v supply.

BLUETOOTH MUSICAL PCB TESLA COIL

HIGHVOLTOMANIAC

Projects I Like & Follow

Low/zero cost upgrades for the Monoprice Select Mini 3D Printer.

Monoprice Select Mini Maximum 3D Printer Mods

us-water-rockets U.S. Water Rockets

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

Building an open source robot arm for makers and small businesses

5+ Axis Robot Arm

dan-royer Dan Royer

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Raspberry Pi zero portable music player

PiPod

Official Hackaday Prize Entry

I will be attempting to build a guided rocket using of the shelf parts

Guided Rocket

Another attempt of clone the beautiful clock-art-installations of Humans Since 1982

A million Times 120 clone

Official Hackaday Prize Entry

Arduino powered rocket stabilization system for mid to high power rockets that gets rid of the pitch over and subsequent downrange flight

Arduino rocket stabilization system [UD: 7/14/17]

There are a lot of cheap audio bluetooth IC available in cheap these days. I got a bunch of them and here is my project.

I Made my own Audio Bluetooth module

The 2016 Hackaday Prize

This project shows how to use the MLX90620 or MLX90621 16x4 Thermopile Array from the Raspberry Pi

Raspberry Pi Thermal Imaging

alpha-charlie Alpha Charlie

Using an EEG sensor and pianobar, I control Pandora with my brainwaves. Whenever a bad song comes on, the script skips to the next song.

EEG-Controlled Music with the RPi

steven-hickson Steven Hickson

The 2017 Hackaday Prize

A smartphone controlled balancing robot using bluetooth, stepper motors, homemade electronics and 3D designed / printed parts.

Android Controlled Self Balancing Robot

arcadia-labs Arcadia Labs

How to design your own HAT module including ID EEPROM.

Designing a Raspberry Pi HAT

jon-buford Jon Buford

An analog gauge to show your computer's CPU utilization

Analog CPU Gauge

adam-fabio Adam Fabio

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

lukas-vacek Lukas Vacek

The 2016 Hackaday Prize

tracking CubeSats faster, anywhere and anytime for everybody!

The Distributed Ground Station Network

Official Hackaday Prize Entry

This project's goal was to make a vest that a visually impaired or gamer could use when moving around in their environment(real or virtual).

3D Haptic Vest for Visually Impaired and Gamers

This is the Satellite Antenna Rotator mechanical system for my step motor driver board project.

Satellite Antenna Rotator Mechanical System

View all

Bits