0%

0%

Rob Brennan

Casual programmer and electronic hardware enthusiast.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/30/2020.

My Projects

Small form factor device, built on the raspberry pi 4 and hyperpixel 4.0.

Raspberry Pi 4 pocket computer

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

Project Bionic Yourself (B10N1C) is a small implant for your arm that makes you a bionic-superhero.

Bionic Yourself V2.0

txyzinfo txyz.info

Hackaday Prize 2019

bringing additive manufacturing to the next level

prism laser scanner

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

This is a custom designed 3D printed skittles sorting machine that sorts skittles by color into bins.

3D Printed Skittles Sorting Machine

nathan-peterson Nathan Peterson

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

A portable Yagi antenna for working amateur radio satellites

WA5VJB ultra portable dual VHF/UHF Yagi

Implement the fantastic robotic packages offered by the TurtleBot3 robot on a budget without sacrificing features and performances.

Build your own TurtleBot 3 backbone

A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.

Minimal Raspberry Pi CM 4 and 5 Carrier

Home automation using the Loxone series of home automation products along with hacks to extend functionality and reduce cost

Commercial home automation

ian-norton Ian Norton

An analog gauge to show your computer's CPU utilization

Analog CPU Gauge

adam-fabio Adam Fabio

The 2016 Hackaday Prize

Who wouldn't want an internet enabled coffee maker!

IoT Coffee Maker

matt-everts Matt Everts

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

Hackaday Prize 2019

LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.

LP3D: A fully lasercut kit 3D printer

Hackaday Prize 2019

Armed with a Nerf blaster. This turret tracks and shoots down micro drones, otherwise know as "Tiny Whoops"

Anti Drone Gun Turret

drew-pilcher Drew Pilcher

An attempt to wirelessly control an old Hitachi air conditioner

Let me control you: Hitachi air conditioner

florian Florian

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

View all

Bits