0%

0%

Jo

Grown-up Kid, Engineer, Explorer, Maker,

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 12/10/2018.

My Projects

RC controlled lasercut Strandbeest

Strandbeest

Projects I Contribute To

We had a Hackaday Assembly at 35C3. Thanks to everyone who was there or came by!

[Hackaday] @ 35C3

elliot-williams Elliot Williams

We're Going to the 36th Chaos Communication Congress, and You're Coming With Us!

[Hackaday] @ 36C3

elliot-williams Elliot Williams

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tan Christopher Tan

Hackaday Prize 2019

The slightly different USB peripheral

pcbtc (GaN edition)

lucy-fauth Lucy Fauth

The 2017 Hackaday Prize

This project focuses on using building a budget powder bed 3d printer capable of printing bones, and creating the needed ink and powder.

Printing bones on a DIY powder bed 3d printer

Official Hackaday Prize Entry

LitePlacer is a Pick and Place machine optimized for prototype assembly. It has optical calibration with two cameras: www.liteplacer.com

LitePlacer - a low cost Pick and Place machine

juha-kuusama Juha Kuusama

The 2017 Hackaday Prize

EPaper monitor driven by either VGA or an Internet Connected ESP32.

PaperBack: A Desktop EPaper Monitor

The 2017 Hackaday Prize

Building a cheap stereo camera using COTS parts

Low cost stereo camera

The 2016 Hackaday Prize

Custom Android app to send commands over to nRF24L01+ receivers with 4-channel PWM capability to control LED strips.

nRF24L01+ network to control lights

Extract best practices from existing garage door projects. Build version that suites my needs; eventually integrate into other HA efforts.

Home Automation - Garage Door Opener

I2C OLED connected to an Attiny85 and a Charlie-plexed button matrix

Skeleton Attiny85 Handheld

The 2015 Hackaday Prize

Home Automation Applied To Medical Cannabis Cultivation

The Humble Roots Project

fabien-royer Fabien Royer

The 2015 Hackaday Prize

An opensource Web platform and cheap sensor hardware solution for the massification of Continuous-flow solution culture (hydroponics)

IoT to Feed the Next Billion

kestler Kestler

The 2017 Hackaday Prize

Neopixel watch with accelerometer.

Arduino Neopixel Watch

marcello-graves Marcello Graves

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Using an Instant Film back for the Lomo Diana F+, a 3D printed pinhole camera for speedy, if tiny, results.

Pinstax: 3D Printed Instant Pinhole Camera

A simple robot built from wire

Freeform robot

A Sound Card + MIDI interface for Raspberry Pi computer

pisound

View all

Bits