0%

0%

Dakota

A 24 year old seeking knowledge, truth, and wisdom. Currently seeking out and following the path of Light.

Oklahoma

Following Follow me

Similar accounts worth following

This user joined on 02/01/2021.

Projects I Like & Follow

How to share a USB key and make a backup of a Dongle?

Share a USB dongle - Software Solution

Supplyframe DesignLab: 2022 Hackada…

This radio receiver is capable of receiving all MW and SW bandwidth, and can also operate as an SDR receiver, so with the help of PC and app

DIY SW , MW , Retro look Radio with ESP32/Si5351

mircemk mircemk

My second generation TDR which aims to be standalone (no oscilloscope) and as cheap as possible while being usable.

Standalone digital TDR (TDR-G2)

ms-boss MS-BOSS

Hackaday Prize 2019

POV Fidget spinner which uses Enhanced PIC16 AngularTimer peripheral, Bluetooth Low Energy 4.2 link, LabVIEW PC application, touch button...

Persistence of Vision Fidget Spinner

matej-nogi Matej Nogić

A dual band VHF/UHF module based around two AX5043 radios. Built to work with HAM Radio communications using AFSK and G3RUH modulations.

VUHF Radio

Uses esp32 powered by Sonos Port to Send IR codes to turn on and off amp when music starts and finishes

Esp32 Sonos Port 12v trigger control Amp

Hackaday Prize 2020

A connected control system for all agriculture applications based on RS485 control nodes and multiple wireless sensor networks

Agricoltura - IO

A home brew 2716 (16kbit) PROM programmer performs by setting addresses and data with toggle switches byte by byte

Fully manual PROM programmer

mitsuru-yamada Mitsuru Yamada

Hackaday Prize 2019

Gone are the days of waking up in the night, forcing your eyes open to check the time, and then blinding yourself with your phone backlight!

HapticEye Clock

michael-kafarowski Michael Kafarowski

Designing a memory controller and OS interface to support multitasking on a 6502 with strictly-protected memory

Protected-memory multitasking for 6502 computer

how to setup Phabricator on a raspberry pi 3B+ with a RAID on usb sticks to store the data somewhere else than on the SD card

Phabricator on raspberry pi

nathann Nathann

The evolution of the Circus Clock driven by the love of glass, metal, wood and electrons [fuselage]

Dome Clock

A diy wide angle lens for my reflex camera

Lens for a reflex camera

Ambient LED artwork created by playing an animated GIF in extreme slow motion with high LED refresh rate, and interpolation between frames.

Continuum - Slow Motion LED Art Display

louis-beaudoin Louis Beaudoin

A multi-track, multi-layer Audio Looper for use in a iive Guitar performance setting running on an rPi in bare metal with a 3D printed case.

rPi Bare Metal Audio Looper

patrick Patrick

Our project is a garage door which operate using an arduino hardware and software

Garage Door 2020

Mateusz Grzebyk

Hackaday Prize 2020

LapPi a Raspberry Pi DIY laptops are compact, power-efficient, and relatively powerful, which makes them perfect.

Raspberry Pi DIY Laptop GADGET - LAPPI

A clock is a counter. This is a counter made into a clock. It counts one second at a time, until it needs to count faster to catch up

Intuitive Counter Clock

View all

Bits