Close
0%
0%

Andrew Dresner

Open Source Robotics Development Platforms.

Portland, OR
Following
Similar accounts worth following
1 Followers
33 Following
0 Projects
0 Likes
andrew-dresner

This user joined on 12/25/2016.

218k
6.8k
186
1.1k
Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.
Project Owner Contributor

ODrive - High performance motor control

oskar-weiglOskar Weigl

160.3k
787
62
502
Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.
Project Owner Contributor

DIY Pick and Place

anthonywebbanthony.webb

81.9k
3.8k
25
145
Pi Zero and camera weigh 13 grams making it an ideal setup for data logging, HD video recording and custom On Screen Display for FPV.
Project Owner Contributor

Raspberry Pi Zero FPV camera and OSD

maksim-surguyMaksim Surguy

36.1k
1.1k
24
70
Capture the display of a Rigol DS1000Z series oscilloscope by LAN only, using LXI SCPI commands. No USB, no VISA, no IVI and no Rigol drivers required
Project Owner Contributor

Driverless Rigol DS1054Z screen capture over LAN

rogeorgeRoGeorge

11.2k
135
1
28
A desktop version of an F16 cockpit, for use with the Falcon 4 BMS flight sim.
Project Owner Contributor

F16 Desktop Cockpit

casey-bannerCasey Banner

9.7k
4.4k
2
31
Project Owner Contributor

WeatherPi - Solar Powered Raspberry Pi Station

switchdoc-labsSwitchDoc Labs

9.4k
825
7
72
A very basic yet expandable smart watch based upon Adafruit's 5v Pro Trinket board
Project Owner Contributor

Arduino Smart Watch

austin-marandosAustin Marandos

8.7k
4.7k
2
26
Superfast Modular 3D Printing
Project Owner Contributor

ORB 3D Printer

thomas-suarezThomas Suarez

3.5k
599
5
46
Original design v-tail quadcopter, all pieces 3D printed. 2213 935kv motors running 10.5 inch props with a 4400mah battery.
Project Owner Contributor

Raptor V-Tail Quadcopter Drone

kendoken.do

3.4k
1.1k
5
25
A plastic recycling system for 3D printers...junk goes in, filament comes out! Fully integrated, automated, novel tech & closed loop control
Project Owner Contributor

ProtoCycler

dennon-oostermanDennon Oosterman

3.3k
3.3k
1
0
Usb phyton controlled heated bed for M3D 3d printer, making abs printing possible
Project Owner Contributor

Heated Bed for M3D 3d Printer

gorkyGorky

1.2k
1.4k
0
5
Using the Raspberry Pi, Meteor, and other hardware to monitor plants, gardens, and control them.
Project Owner Contributor

Another Garden Automation Project

klhutchinsklhutchins

963
993
0
13
I got a MeArm, let's see what we can do with it.
Project Owner Contributor

MeArm Adventures

danielDaniel

582
1.1k
0
1
This project replaces the paper on the back of a restroom door with an RPi Zero to make easier the control of restroom maintenace
Project Owner Contributor

Restroom maitenance log automation

mauro-pichilianiMauro Pichiliani

494
870
0
3
Automated, smart trash can to separate recyclables from landfill waste
Project Owner Contributor

TrashBot

cleanroboticsCleanRobotics

445
1.1k
8
8
Got a neat little Parallax robot from a friend of a friend who passed away. Gonna revitalize it with my Beaglebone Green & SLAM Navigation
Project Owner Contributor

Vintage Parallax Robot Restoration

avrAVR

355
440
2
4
Shield for RS-422 over CAT5 with USB for a host
Project Owner Contributor

RPUftid

ronaldsutherlandronald.sutherland

335
450
0
6
An analog beat sequencer with nixie display and RGB LED envelope feedback
Project Owner Contributor

Arduino-controlled nixie sequencer

clandestignCLANDESTIGN

View all

Share this profile

Share

Bits

Send a private message to Andrew Dresner

Become cool instantly

Create your Hackaday.io profile like Andrew Dresner and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Andrew Dresner", please tell us the reason.