0%

0%

InverseInductor

I make circuits good

Brisbane, Australia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/30/2014.

Projects I Like & Follow

Official Hackaday Prize Entry

Python-powered machine vision modules

OpenMV

iabdalkader i.abdalkader

Official Hackaday Prize Entry

Fully stand-alone HF (Shortwave) Software Defined Transceiver & Vector Network Analyzer. Designed for rugged portable use. Highly hackable.

PortableSDR

michael-r-colton Michael R Colton

Official Hackaday Prize Entry

LitePlacer is a Pick and Place machine optimized for prototype assembly. It has optical calibration with two cameras: www.liteplacer.com

LitePlacer - a low cost Pick and Place machine

juha-kuusama Juha Kuusama

The 2018 Hackaday Prize

Von-Neumann 16-bit relay computer with Brainfuck++ instruction set

BrainfuckPC Relay Computer

artem-kashkanov Artem Kashkanov

The 2017 Hackaday Prize

Low-cost, open-source FPGA boards in a tiny form factor with built-in USB, SPI flash, LDO, and MEMS clock.

TinyFPGA B-Series

luke-valenty Luke Valenty

ED-64 will be an 8-bit computer built with discrete components, and will feature a ferrite core memory (documented as a separate project).

ED-64: A discrete 8-bit computer

andrew-starr Andrew Starr

Official Hackaday Prize Entry

A device consisting of a Toshiba TCD1304AP CCD sensor, a Wolfson WM8253 Video ADC, a Parallax Propeller, and an FTDI FT232H USB IC

open-Spectrometer

badgy is a rechargeable coin cell powered ePaper display with WiFi connectivity

badgy

Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.

TinyFPGA E-Series

luke-valenty Luke Valenty

The 2015 Hackaday Prize

A shit-ton of things that are useful for a shit-ton of projects. (and, Think 'apt-get' for reusable project-code)

commonCode (not exclusively for AVRs)

eric-hertz Eric Hertz

The 2015 Hackaday Prize

A minimalist direct conversion radio receiver. 4 general purpose transistors and a Polyakov 2 diode mixer.

PolyMorph Receiver

Exploring the FL2k USB-to-VGA dongle for signal generation

FL2k Experiments

ted-yapo Ted Yapo

This clock was made to watch time in an aesthetically and funny way, you will never get bored watching it

Arkaclock: Retro arcade Arkanoid with clock

victor-serrano Victor Serrano

Bits

ProtoVoltaics wrote 08/03/2015 at 11:33

Thanks for following our Pick and Place project!

Are you sure? yes | no

morph wrote 06/20/2015 at 08:21

Thanks for the follow ^^

Are you sure? yes | no

Eric Hertz wrote 06/14/2015 at 06:15

Howdy! Thanks for the follow!

Are you sure? yes | no