0%

0%

Joris Bijnens

Programmer with a passion for automated 3D prints

Antwerp, Belgium

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/13/2016.

My Projects

The 2017 Hackaday Prize

Make kids earn TV minutes by doing chores, playing outside or eating their veggies... & learn them the concept of money while doing it

PlayPerView

The 2017 Hackaday Prize

Small 3D printed tank that can drive around forever

Tiny Tank

Projects I Like & Follow

Get fast Wifi via the Raspberry Pi GPIO header using the SDIO bus of the ESP8266. Also with audio jack for the zero.

ESP-12F Raspberry Pi GPIO SDIO Wifi

The 2016 Hackaday Prize

The goal is to build a tiny autonomous sailboat able to travel potentially forever, powered using solar panels and wind.

Green powered sailboat

A no-frills Arduino-compatible ESP8266 Wi-Fi development board for users in the education and makerspace domains

The ESPresso Lite

The 2015 Hackaday Prize

open source circular knitting machine replicable with digital fabrication and makers' tools.

Circular Knitic

varvara guljajeva

2-channel simultaneous AD/DA conversion with up to 1 MSamp/s

Raspberry Pi High-Speed AD/DA

A Raspberry Pi inside of a GameBoy retaining as much of the case as possible and using

Raspberry Pi Gameboy Utilizing Cartridges

The 2016 Hackaday Prize

A quadcopter flight controller based on the Arduino nano

Project hΕli

The 2015 Hackaday Prize

Automatic Cable Modem Rebooter

netBOOT

The 2017 Hackaday Prize

This card has not-protected NFC tags, that can be programmed to do actions, or save data. They can also be protected with a password.

NFC Card

Adding a Zephyr Ion vaporizer to the Internet of Things

Vape-Fi

jarocks jarocks

Laser Cut Binary Clock with Remote Control

Wooden Bits

John Whittington

A built-in wireless MIDI-to-USB interface for Rock Band keytar using XBee radios

BeeTar - Wireless Rock Band Keytar

General info for the workshop at the Hackaday SuperConference 2015.

Crowdsourcing Control with the ESP8266 Thing

Toni Klopfenstein

LED Fireflies that pulse at dusk

LED Fireflies

One out of two cheap clocks from eBay melted in the sun. I equipped the second unit with fans to save it from the horrors of Swedish summer.

Air-cooled flip-clock

The 2016 Hackaday Prize

Automatically predict when a medical refrigerator needs service with four remote temperature sensors and real time analytics in the cloud.

Heartbeat Monitor for Machines

The 2016 Hackaday Prize

An everyday uniform embedded with wearables to help assess and assist in your everyday exercise routines.

Exercise Buddy

20GHz clocked NCO? This is not impossible, but doable ;)

NCO with 20+ GHz clock

View all

Bits