0%

0%

datatribe

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/18/2017.

My Projects

Cross-discipline approach to engineering a wind power generator to overcome common obstacles to wind power generation.

Efficient Ground Level Vertical Shaft Wind Turbine

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Mi-Light/Limitless LED are a type of RGB(W) LED lamps with standard light bulb sockets and a proprietary 2.4GHz radio control protocol

Reverse-Engineering the milight on-air protocol

henryk-pltz Henryk Plötz

just out of interest I bought one of these to play with

DBPOWER ELM327 Wi-Fi Interface (OBD II) "review"

While you could use a WiFi shield, or one of the many, many, ESP8266-equipped 'duinos out there, why not just make your USB cable WIRELESS?

Wireless USB for Instant IoT

thane-hunt Thane Hunt

The 2015 Hackaday Prize

Arduino connects to the TX line (of a router, RPI) and display serial data on smartphone over WiFi

Hardware serial port monitor with WiFi

The 2016 Hackaday Prize

An open-source Arduino based toolkit to learn, build & debug electronics and robotics projects

evive: a prototyping platform for makers

dhrupal-r-shah Dhrupal R Shah

Using a port of ChibiOS for the Teensy 3 series, my goal is to run it on Teensy 3.6.

ChibiOS on Teensy 3.6

Official Hackaday Prize Entry

The wireless customizable low-cost home automation solution

Cumulus Wireless Sensor Platform

Be able to make & upload MagSpoof with variable tracks, to use it without Arduino dependencies, and implement it on the same Raspberry GPIO.

MagSpoofPI

salvador-mendoza Salvador Mendoza

Adds a payment system and enables full control over coffeemakers with toptronic logic unit (for example from Jura) using the service port.

Coffeemaker Payment System

inter-action Inter Action

The 2017 Hackaday Prize

The solution is leveraging from the available stuff, affordable.

Bracelet for the blind

The 2015 Hackaday Prize

Lets you control any electrical stuff like fan,TV,motor from your android phone from anywhere in the world.

Android Remote Control for Home Applicances

A radio controlled Nixie clock which also features a thermometer.

Radio controlled Nixie Clock

Small (hifi/stereo) pre-amp with teensy3.2 + audioshield

Teensy audio pre-amp module

marcell-marosvolgyi marcell marosvolgyi

The need for speed in DSP and animation leads us to look for the fastest way to do arithmetic.

PIC32 Fixed & floating point performance

bruce-land Bruce Land

like Metasploit but for Hardware!

HardSploit.io

Sonoff TH10/TH16 is a smart switch version of Sonoff which can monitor and set temperature and humidity through the iOS/Android APP eWeLink.

Home appliances control using SONOFF TH10

bikash-narayan-panda Bikash Narayan Panda

I made this project in order to build a cost effective surveillance car which can be controlled over the Internet or on any private network.

Surveillance Car Controlled via DTMF

varun-kumar Varun Kumar

View all

Bits

RUN.CAM wrote 07/15/2017 at 06:03

Thank you for following RGGBer project. It is now live on

https://www.crowdsupply.com/jie-zou/rggber-dev-kit and we will launch it in Aug 2017 and you may sign up for latest information. RGGBer Dev Kit makes embedded vision development easy!

Are you sure? yes | no