0%

0%

gerald_thiel

Retired tinkerer and collector of many old things.

Seattle, Washington

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/26/2014.

My Lists

FPGA projects

Electronics

Curated by gerald_thiel

DIY CNC milling machine

milling machine

Curated by gerald_thiel

Projects I Like & Follow

The 2016 Hackaday Prize

(Mr.Robot's) fsociety inspired Mechanical keyboard. Wirelessly sense, assist and automate your good and bad computing activity.

The fsociety Keyboard

pamungkas-sumasta Pamungkas Sumasta

Official Hackaday Prize Entry

An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.

OpenExposer

mario-lukas Mario Lukas

The 2015 Hackaday Prize

Custom designed breadboard computer (BBC!) with bespoke programming language, full graphics, sound and SD card storage.

65c02 Homebrew Computer on breadboard

The 2016 Hackaday Prize

3D Printed components and other hardware to make a PCB routing machine, which inherently can do other things.

3D Printed PCB mill

The 2016 Hackaday Prize

Replicate an Apple-1. Or an OSI Challenger. Or something else. Design your own 6502 computer by programming it.

L-Star: Software-Defined 6502 Computer

jac-goudsmit Jac Goudsmit

All Sky meteorite camera build under 150$.

Cheap All Sky camera project with Raspberry Pi

Official Hackaday Prize Entry

A single-board computer kit with a 6502 controlled by a Propeller.

Propeddle: Software-Defined 6502 Computer

jac-goudsmit Jac Goudsmit

T962A Controller Drop-In (using *STM32H7*) This is a drop-in replacement controller board for the T962A reflow oven, using the STM32H7

T962A Controller with 5"/7" Touch TFT (STM32)

The 2016 Hackaday Prize

A open source CNC-Router build arround a IKEA Torsby Table

I**A-CNC Machine

After the E, There was She. A Small Expandable 65c816 computer

SheMachine

LinkSprite DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino GRBL

LinkSprite DIY CNC 3 Axis Engraver Machine

A (sort of) low cost CNC with broad capabilities and low storage volume

High performance dorm room CNC

oscar-s Oscar S.

Two Stepper Motors. One arduino. Adventure. Explosions. Maaan, 140 char is hard. Hardware.

Laser Cutter 300mW

tiago-damian Tiago Damian

Digital audio mixer using S/PDIF implemented on an FPGA

FPGA S/PDIF Digital Audio Mixer

pontus-rodling Pontus Rodling

Budget CNC designed with minimal space in mind, with modular attachments planned for future versions.

ClosetFab - CNC in (limited) Space

Development of hall effect sensor PCB and housing to be used as limiting and homing for CNC machine

CNC Hall Effect Sensor (DIY)

im-a-maker I'm a maker

This is a simple way to adjust the height on the z-axis of my lasercutter; just a jog dial, readout, and stepper controller

Simple jog dial for stepper motor

Wood structure, arduino controled, cheap and easy to build.

DIY CNC MACHINE

View all

Bits

AVR wrote 05/15/2014 at 20:13

Thanks for following my project dude! It means a lot I've been working on it since august on my own, and I'm so glad there are folks interested in it other than myself!

Are you sure? yes | no