Close
0%
0%

jose.gleyson83

Busco conhecimentos técnicos sempre

Fortaleza/ce Brasil
Following
Send a private message
Similar accounts worth following
1 Followers
54 Following
0 Projects
0 Likes
josegleyson83
Send a private message

This user joined on 04/17/2022.

4.4k
2.8k
15
140
Open-hardware bicycle compass
Project Owner Contributor

Aurora Bike Compass

andr-biagioniAndré Biagioni

2.9k
1.7k
22
34
Bringing a vintage DIY binary counting computer back to life
Project Owner Contributor

Restoring the TRANSBINIAC computer

johnJohn

2.7k
2.7k
3
10
ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.
Project Owner Contributor

IOT ModbusBox

luisgculuisgcu

2.5k
23
0
22
This is certainly inspirational, I detail the full making steps of a cool glowing Magic LED Cube, all necessary files are included.
Project Owner Contributor

Glowing RGB LED Magic Cube (WS2812)

diy-guy-chrisDIY GUY Chris

2.3k
1.3k
2
22
iOmni, is an autonomous (eventually) robot with Lidar to be used as a security system
Project Owner Contributor

iOmni

leandroLeandro

2.2k
52
3
35
Full 3D printed, 5M HTD & 3M HTD timing belts, ML5010 BLDC, ESP32-WROOM BLDC controller ~8Kg
Project Owner Contributor

$1000 3D Printed BLDC Quadruped Robot

paul-gouldPaul Gould

2.1k
2k
1
7
Diode/transistor switching circuits
Project Owner Contributor

Discrete Component Switching. flip flop etc.

alan-cyrAlan Cyr

2k
29
8
19
A small 12-DoF printable legged robot using quasi-direct drive brushless actuators
Project Owner Contributor

Felin Quadruped

pat92frpat92fr

1.7k
1.8k
0
4
Art piece that creates kaleidoscopic colored shadows. Arrays of high-powered LEDs in a circle, pointing at the center.
Project Owner Contributor

Colordance Circle

adam-demuriAdam Demuri

1.6k
652
1
10
Legible notes that don't cost a fortune
Project Owner Contributor

LCD music display

lion-mclionheadlion mclionhead

1.5k
1.5k
0
11
The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.
Project Owner Contributor

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

alex-tsamakosAlex Tsamakos

1.5k
1.5k
0
2
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
Project Owner Contributor

Smart Home Using NodeMCU ESP8266 & Blynk IoT app

subhajitSubhajit

1.1k
1.2k
1
13
We are building a robot that automates 3D printers in a 3D printer farm.
Project Owner Contributor

A robot for automating 3D printers

swaleh-owaisSwaleh Owais

863
849
3
6
I'm nearsighted and my VR headset doesn't have a provision to correct for it. Wearing glasses inside a VR headset was an awful experience!
Project Owner Contributor

Hacking VR: Prescription lenses & adapters.

cprossucprossu

704
694
0
5
This is a 3d printing modular pulley system.Total mechanical advantage is 8:1. So, we can lift a mass of 80 kg with a 10 kg pulling force.
Project Owner Contributor

3D Print High Strength Pulley System(Block&Tackle)

semiggsemigg

692
685
1
12
The purpose of my project is to build a system for tracking satellites in orbit.
Project Owner Contributor

Build a System for Tracking Satellites in orbit

mark-liuMark Liu

379
13
0
6
A low-cost 12DOF quadruped, actuated by hobby servos.
Project Owner Contributor

Quadruped bai servo

shuang-pengShuang Peng

347
347
0
0
System to level bed of a laser cutter and then act as a motorized Z, while also handling machine safety functions
Project Owner Contributor

Laser Cutter Bed Leveling & Safety System

zackZack

View all

Share this profile

Share

Bits

Send a private message to jose.gleyson83

Become cool instantly

Create your Hackaday.io profile like jose.gleyson83 and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "jose.gleyson83", please tell us the reason.