0%

0%

Jonathan Díaz

Mechatronic Engineer, 3D designer

Colombia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/25/2018.

Projects I Contribute To

The 2018 Hackaday Prize

Need a mini linear actuator that is easy to print and implement in your robotics DIY projects? We got you

3D printed mini linear actuator

giovanni-leal Giovanni Leal

The 2018 Hackaday Prize

We are trying to implement a pulse sensor to actuate a 3D printed prosthesis instead of the myoelectric ones. That's a first, we think.

Pulse sensor to actuate a Robotic Hand

giovanni-leal Giovanni Leal

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Surf the web using an Arduino and an ethernet shield. Because you can.

PIP Arduino Web Browser

The 2018 Hackaday Prize

Need a mini linear actuator that is easy to print and implement in your robotics DIY projects? We got you

3D printed mini linear actuator

giovanni-leal Giovanni Leal

Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board

thingSoC ESP32 Android/IoS GUI Control

pattern-agents Pattern Agents

3D Printed holder: Allen wrenches are held in a circle by a single o-ring, all individually accessible.

Improved Allen Wrench / Hex Key Holder

alex-rich Alex Rich

The 2016 Hackaday Prize

The idea is to create an accesible prosthetic hand that is commercially available in Colombia and doesn't use the classic string system.

TNS 1i

giovanni-leal Giovanni Leal

Design for 3D printed Helmholtz Coil that can be configured for any wire size, number of wraps and magnetic strength

Highly Configurable 3D Printed Helmholtz Coil

Don't want to hard code your Blynk AuthID or WiFi credentials into your code? Then use Embedis to store and change them on-the-fly!

Blynk using Embedis for Settings

pattern-agents Pattern Agents

The 2018 Hackaday Prize

Using ninjaflex, I have revived a dead Phillips CD-i

3D printed belt for Phillips CD-i

The HDMI2USB project develops open hardware to record and stream HD videos (from HDMI & DisplayPort sources) for conferences and usergroups.

HDMI2USB.tv Open video capture hardware + firmware

tim-ansell Tim Ansell

The 2017 Hackaday Prize

Audio feedback for the brain-injured who need help learning to balance again.

Sonassist

simon-merrett Simon Merrett

Read/write access to floppy drives for storage, the oldschool way.

Arduino General Purpose Floppy Driver

stian-soreng Stian Soreng

The 2018 Hackaday Prize

The project focuses on an open source design of a gripper with tactile sensor system for robotic hands and exoskeletons

Open source Tactile sensor enabled robotic gripper

aman-garg Aman Garg

The 2018 Hackaday Prize

Illuminated, 3D printed guitar.

Sound-Reactive LED Guitar

Jokingly we gave him a name Death Star(it's from movie Star Wars). This robot is automatic, he goes and turns himself.

Death Star (Robot)

toni-paunovic Toni Paunovic

Hackaday Prize 2019

I have a big gap on my teeth and don't want to go to the doctor.

Homemade Orthodontics

giovanni-leal Giovanni Leal

Bits