0%

0%

pashiran

Mechanic Enginner, Mockup Maker

Seoul, South Korea

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/24/2016.

Projects I Like & Follow

The 2017 Hackaday Prize

A versatile autonomous environmental drone using a buoyancy engine

OSUG: Open-Source Underwater Glider

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

The 2018 Hackaday Prize

AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25

Compact, $25 spectrometer

The 2018 Hackaday Prize

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

Smart Motor Driver for Robotics

Hackaday Prize 2020

Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.

WinDIY - HAWT Wind turbine

The 2018 Hackaday Prize

Upgraded version of the small board for connect multiple rotary encoders on the I2C bus.

I2C Encoder V2

Modified Chroma74 shelf label to be my weather station display. It is 7.4" 3-Color E-Ink units that cost $12 on eBay.

7.4" E-Ink Shelf Label used as a Weather Station

The ESP32 is a powerful microcontroller, but what games can it actually run?

Gaming on the ESP32 / Odroid-Go

Hackaday Prize 2020

A 2m windturbine made from corn! Completely 3D-printable and open-source.

Propel-E 450 | A very powerful windturbine

Bram Peirs @ fWtW

The 2017 Hackaday Prize

An ultra strong and fast servo that is reasonably priced. The goal is to generate 60ft*lbs (11 520oz*in) with 60 rpm no load rpm speed.

Ultra Servo

A 3D printed fully mechanical 7 segment display. It can be used without any electronic at all, by turning a gear.

Peters 7-seg all mechanical display prototype 2

A 3d printed split-flap display using a 28byj-48 stepper motor

Split-flap display

Open-source and open-hardware custom scientific RPN calculator

OpenRPNCalc

Anton Poluektov

DIY replica of TIL305 5x7 matrix display.

DIYTIL305

An open source LC-Meter, which is very accurate and easy to build. All the documentation included.

build an LC Meter

I've made a custom Magnetic Rotary Encoder using an AS5048A

Magnetic Rotary Encoder

Chris G Chris G

The Stat Tracker is a portable battery powered device that keeps track of health, energy, and dashes for the HLD Table Top RPG.

Hyper Light Drifter Stat Tracker

View all

Bits

Radu Motisan wrote 01/15/2017 at 16:18

Hi, thanks for following the #Portable environmental monitor . As you saw already, it is a global network to measure and show the real data, uncensored. If you want your own unit and join this effort, use this contact form: http://www.uradmonitor.com/join-the-network/

Are you sure? yes | no