0%

0%

jormonaghan13

Woo hoo

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/19/2020.

My Lists

Fav

.

Curated by jormonaghan13

Projects I Like & Follow

Hackaday Prize 2019

The slightly different USB peripheral

pcbtc (GaN edition)

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

Vojislav Milanovic

A floor based midi controller with 5x5 buttons and LEDs, 4 pedal inputs, a 3.5" touchscreen, 4 rotary controllers, and a MIDI host port.

teensyExpression USB MIDI controller

Patrick Patrick

Control a Marshall JCM800 2204 style guitar amp using touch screens, midi foot pedals and an Android App

Arduino Nextion Android Midi Valve Guitar Amp

Microwave synthesizer - experiments with microwave black magic

Microwave synthesizer 4-7GHz

Pushing the envelope of artificial intelligence with deep fake electrical engineering and songbird identification

Deep Fake Birdsong

Hackaday Prize 2019

The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.

Ultra Servo V2.0

This is an audio application that produces 3D binaural audio from 2D mono audio samples and positional information given by GUI.

Binaural Audio Editor

Pablo Antonio Camacho Jr.

this blog we have shown you Astronomia Coffin Dance Tune With Arduino Uno

Astronomia Coffin Dance Music Using Arduino Uno

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

I thinked to made an electronic device that used for audio treatement

DSP Audio : 4 OUT - 2 IN

Diagnose infectious diseases like malaria and tuberculosis using a DIY microscope and AI running on a cellphone

AIScope - DIY smart microscope for isolated areas

aiscope aiscope

The goal of this project is to train an open-source 3D printed quadruped robot exploring Reinforcement Learning and OpenAI Gym.

rex-gym: OpenAI environments for a quadruped robot

Using an 80s handheld for home automation

PSION II Remote Control

An Apple ][ peripheral card to control up to four SPI devices without the need for bit banging.

SPI Master Peripheral Card for the Apple ][

The start of a 3D printed "Transformer" styled mechanism.

3D Printed "Transformer" Styled Mechanism

Building a modular GUI for Python3 with Glade for sensor graphs and effector controls

Python3 GTK UI with Glade

View all

Bits