0%

0%

mkevinbauer

DIY everything possible, and my hobby is starting new hobbies. Electronics off & on (ha!) for the last 40+ years.

St. Louis, MO, USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/28/2022.

Projects I Like & Follow

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Full tutorial on how to build a conveyor belt 3D printer. I provide completely free and opensource CAD and firmware to build this printer.

Print HUGE parts with Conveyor Belt 3D Printing

swaleh-owais Swaleh Owais

Supplyframe DesignLab: 2022 Hackada…

Modular open hardware robot for uROS2 & Microblocks

Rosmo robot

I found myself being intrigued with the low level safety features of my X201. I experimented with the I2C bus and it got interesting...

Hacking a Supervisor Password - With a Beagle Bone

timo-birnschein Timo Birnschein

An open-source dual-channel SDR Raspberry Pi HAT with up to 6 GHz tunable range

CaribouLite SDR for RPI

david-michaeli David Michaeli

Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.

ESP32 WiFi + Bluetooth + Manual control 8 relays

Arduino Sketch for ESP32, using RC-Switch(c) library and the ESP32 RMT peripheral to emulate RF remote controls (433/315Mhz)

ESP32 RMT peripheral for radio remote control

I design my own digital caliper based on STM32F103 blue pill.

DIY Digital Caliper

dimitar Dimitar

Diode/transistor switching circuits

Discrete Component Switching. flip flop etc.

alan-cyr Alan Cyr

Automate cell information readout from a Liitokala Lii-500 charger by tapping into it's LCD interface

Li-Ion Charger Automation

I made this sketch to test analog/digital IO pin for everyone, don't bother to write lengthy C program!

Ready-to-use Arduino Sketch for I/O Testing

athaariq-eric-ardhiansyah Athaariq "Eric" Ardhiansyah

How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.

Smart Home Using NodeMCU ESP8266 & Blynk IoT app

2021 Hackaday Prize

We are building a robot that automates 3D printers in a 3D printer farm.

A robot for automating 3D printers

swaleh-owais Swaleh Owais

Raspberry Pi Pico vs Arduino Nano RP2040 Connect

Arduino Nano RP2040 Connect Vs Raspberry Pi Pico

a universal IR remote controller with only WIFI connection required by RTL8722DM

Universal IR remote controller

michael-zhang Michael Zhang

Putting out wild fires using wind by firing rockets at central location of the wild fires so that the rocket generate enough blast wind.

Wildfires extinguisher

anteneh-gashaw Anteneh Gashaw

You'll learn how to construct your own Arduino laboratory.

LAM - Laboratory Arduino Mobile

fcodiegomoreira

Beta Version of the Raspberry Pi Bootloader That Implements Network Installation

Beta Version of the Raspberry Pi Bootloader

View all

Bits