0%

0%

Bùi Tấn Khang

Mr Simple

Việt Nam

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/05/2021.

Projects I Like & Follow

A simple point-and-shoot near-IR camcorder built with a raspberry pi

Near-IR Camcorder with a Raspberry Pi

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

Monitor the emission of toxic chemicals from 3D Printing

Smart 3D Printer Emission Monitor

gary-peng Gary Peng

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

Hackaday Prize 2020

for demonstration of physical laws in generating electrical energy using hydropower plant

3D printed hydroelectric power plant model

matic-markovi Matic Markovič

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

The circuit for Audio Amplifier is made on Vero-board which stimulates and amplifies the input sound by using a battery.

How to make Audio amplifier with 2N7000 MOSFET

ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.

IOT ModbusBox

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Hackaday Prize 2019

Gone are the days of waking up in the night, forcing your eyes open to check the time, and then blinding yourself with your phone backlight!

HapticEye Clock

michael-kafarowski Michael Kafarowski

This is a simple Arduino shield for Nimbelink Skywire cellular modems. They all have the same pinout, so the modems are interchangeable.

Arduino Shield for CAT M1 and NB-IoT Modems

nootropic-design nootropic design

This is a L298 motor driver from Open-Electronics.org and a BeagleBone Black w/ Python software using Adafruit_BBIO.

BeagleBone Black and a L298 Motor Driver

Project includes detailed schematics, Altium PCB files and schematics of the build.

13.56MHz Wireless Powered Drone

alireza-dayerizadeh Alireza Dayerizadeh

This is a ESP32 dev kit v1 bluetooth based controller that can be used with ROS, its rechargeable, has buttons, joystick and 9 dof IMU.

[2020] ROS bluetooth controller [prototype]

maximiliano-rojas Maximiliano Rojas

Simple pcb module for PICkit2

PICkit2 to AVR/Flashrom (SPI) adapter

A collection of modular programs to streamline robust DIY measurements using cameras, projectors, LCD, etc..

Structured Light Tool Kit

Hackaday Prize 2020

A device to limit community spread

Patient Zero - A device to limit community spread

I was annoyed to always have to solder a 6pin connector to my boards to use my ISP programmer. So made an adapter with Pogo pins.

AVR ISP Pogo adapter

View all

Bits