0%

0%

the phoenix

self taught programmer at cpp/nodeJS/PHP/python... my interest this day is hardware programming (arduino/esp/STM32)

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/09/2020.

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

In this period of isolation, I'm trying to build an oximeter with parts already in house. An oximeter is made by two leds and a photodiode.

Oximeter do it yourself

giulio-pons Giulio Pons

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

Hackaday Prize 2019

Ardunio-Compatible M0/Zero/SAMD21 with FET Driver, MOSFETs, Absolute Magnetic Encoder, USB and RS485 comms. ~$US50

Brushless Actuator (Arduino-Compatible)

paul-gould Paul Gould

Build a COVID-19 shield with a device that estimates skin temperature and indicates if a person might have a fever.

Skin Temperature Scanner

gilbert-franois Gilbert François

Hackaday Prize 2019

An open-source four-legged robotics platform

Spike, the Robot Dog

michael-g Michael G

The 2018 Hackaday Prize

A low-cost STM32 board with motor controllers created along with visual programming and control software for use in education.

Visual Robotics Platform

The 2018 Hackaday Prize

Unique, compact power conditioning enables always-on sensor monitoring and Long-Range radio (LoRaWAN) link for IoT applications.

SoLoRa - Solar Powered always-on IoT sensor node

joe-miller Joe Miller

The 2018 Hackaday Prize

Do you want a drone ready to be in the air 24 hours/day, 7 days/week? We're propossing this automatized drone supercharger. Go up darling!!!

Drone Supercharger

frasanz frasanz

We're going to learn some techniques for reverse engineering 2-layer PCBs.

Remoticon: PCB Reverse Engineering

The 2018 Hackaday Prize

Early computer designers were cheap masochists. This front panel is much better yet could have been made 50 years ago !

Hardware assembler / EMUI

yann-guidon-ygdes Yann Guidon / YGDES

My aim for this project is to create a slightly larger radio telescope, which is able to observe signals on the 21cm hydrogen line

Slightly bigger radio telescope

gonalo-nespral Gonçalo Nespral

Comparatively huge heat sink for Raspberry Pi sourced from old PC case

Raspberry Pi Heat Sink Recycled from PC

jeremy-s-cook Jeremy S. Cook

LCR meter, PDF and Gerber file share

AVR Transistor tester, Utsource view

Electroniclovers123

All laser cut, low cost efficient clear face shield for medical providers with no 3D printing

Flatiron Face Shield

Andrew Blackstock

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

1. Successful in europe (unheard of in US/canada) 2. Reduces ICU and MD burden 3. Fairly easy and cheap to manufacture

CPAP Helmet non-invasive ventilation

As many buttons as you want. Any additional widgets. Other capabilities are on the way

Smart Garage: Control Panel

sergey-b Sergey B

View all

Bits