0%

0%

jake_k

I pretend to know how to code.
Can solder, machine, fly planes

Narnia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 02/12/2016.

My Projects

Comparing cheap hardware in order to determine best efficiency

18650 Battery Management options

I want to track my bike rides and get some experience with CoreFlight

Bike Computer with Flight Software

Projects I Like & Follow

The 2016 Hackaday Prize

Fast RPi WiFi without USB

RPi WiFi

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

Make Beautiful Big Labels Practically for Free

Masking Tape Plotter

PlatformIO is an open source ecosystem for IoT development (Cross-platform IDE and unified debugger. Remote testing and firmware updates)

PlatformIO

A very small HiFi audio CODEC module

HiFi audio codec module

The 2016 Hackaday Prize

Real time graphic readout of critical engine performance parameters.

Engine Monitor

AVR based chess computer

Chess Mate

Hackaday Prize 2019

Defining and implementing a bus protocol that is built around low-cost FPGAs to enable modular and affordable control and DAQ systems.

FBus: Open FPGA Realtime Bus

The 2016 Hackaday Prize

Building an inexpensive (as close to free as possible) workstation based on the Raspberry Pi 3

Raspberry Pi 3 based workstation

My version of the ubiquitous USB serial port gizmo

FTDI-be-gone

Keep your design synchronized between ECAD and MCAD allowing to optimize the layout based on the mechanical constraints.

kicad StepUp: a Seamless ECAD MCAD Synchronization

Maurice Maurice

Driving pieces of shutter glass

Shutter Glass Tests

IR Receiver or Demodulator module made using photo-transistor BPW 77NB and standard NPN amplifier transistor PN2222A working on Arduino Due

Custom IR Remote demodulator for Arduino Due

an arduino compatible gaming mouse with usb and bluetooth support

ArduMouse

Thomas Pointhuber

ATmega32 based controller/display for my old espresso machine. It controls brew/steam temperature, pump, grinder etc.

AVR controlled espresso machine

Control your board from Windows

Control Arduino from PC

Rescue a 3D print that needs support by stacking index cards underneath the overhangs.

Printing on Shims

Developing wearable gear for hazardous gas detection using PIC preprocessing and modular sensors kits

IoT, PIC G.as A.ir S.niffer

View all

Bits

Eric Hertz wrote 03/17/2016 at 09:09

Howdy! Thanks for the skull and data-points!

Are you sure? yes | no