0%

0%

Michael J. Rippett

Software engineer for the past 20 years; quantitative trader for the past 3; proud father for the past 5. I reside in Portsmouth, NH with my Melissa.

Portsmouth, NH

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 04/16/2018.

Projects I Like & Follow

A mostly printed digital microscope powered by a Rasperry Pi Zero W

Pi Microscope

An open-source, affordable, dynamic quadruped robot

mjbots quad A0

8 GHz BW, up to 1 TS/s ET Sampling

8 GHz Sampling Oscilloscope

Hackaday Prize 2019

Blackbox shifts 3D printing towards a multitool manufacturing robot.

Multitool 3D Printer - Blackbox

3D printed HUD display. Used in car to display maps, navigation, speed, time etc.

HUD display for cars

Hackaday Prize 2019

Run Marlin & Octoprint on Raspberry Pi directly. Improve print speed and smoothness

Using Raspberry Pi as a motherboard for 3D printer

In this project we try to build a cheap AR module that you can use with your regular glasses.

uGlass: an AR module on your glasses

Ultimate Robotics

Design and how I made it from scratch

FULL RC Hawker Hurricane

Reverse engineer a mid range car dash cam and access the live stream

Reverse Engineer DDPAI Dash Cam Firmware

ANANTHAKRISHNAN U S

This is clone of the Odroid Go game device with upgrades

ESP32 Game Console

Miroslav Zuzelka

This my project test distance lora in case face to face, Unexpected results, reach 11.6km

ModbusRTU, lora 12km (real distance)

Read/Write Modbus RTU (RS485) via Ethernet and WiFi use ESP32

Modbus RTU, LAN8720A, ESP32

3d printed 8:1 planetary gear ratio actuator module with VESC firmware based circular motor driver

(8:1) 3D Printed Planetary Gear Actuator Module

Round tracks hack: An easy way to design round tracks in KiCAD with a full DRC support.

KiCAD RF tools

Maurice Maurice

This Project consists of the practical realization of a fully optical computer of progressive architecture

OC1 - OPTICAL COMPUTER 1 - v0.01

A hexagon-shaped 4-channel EMG to control stuff with it. Writing firmware for that!

uEMG - small and stylish 4-channel EMG board

Ultimate Robotics

Yet another thrift-store portable CRT TV conversion for direct video from Raspberry Pi analog jack

B/W TV conversion to Raspberry Pi monitor

CAN In Automation - Stack for Atmel AVR's

avrCIA

Alexander Krause

View all

Bits