0%

0%

Mark Stevens

Semi-retired engineer, entrepreneur, husband of Hippolyta, father of the Fabulous Five, grandfather to Tuor of Middle Earth.

Tupelo, MS

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/12/2017.

Projects I Like & Follow

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijck Patrick Van Oosterwijck

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

Customizable OLED keyboard that adapts to the apps you use

Keybon – Adaptive Macro Keyboard

Hackaday Prize 2019

Portable CoreXY 3D printer (foldable)

X printer - portable

malte-schrader Malte Schrader

The 2018 Hackaday Prize

A system designed to be easy to build and setup. Uses two $20 webcams and open source software to provide accurate eye tracking

Low Cost Open Source Eye Tracking

john-evans John Evans

The 2017 Hackaday Prize

Next Gen LiFePO4 battery / UPS / power manager for Raspberry Pi, ideal for headless and IoT use

LiFePO4wered/Pi+

patrick-van-oosterwijck Patrick Van Oosterwijck

2021 Hackaday Prize

Large WS2812 LED cylindric display project (1600 LEDs)

LED matrix cylinder gaming display

A one stop shop with fixed 5V/12V/24V/USB metered power, adjustable power supply, voltmeter, continuity tester and basic oscilloscope.

Basic Hacker MultiBench

2021 Hackaday Prize

Cheap, Open-source, safe, and compliant 6 - Axis 3d printed robotic arm based on Quasi direct drive BLDC drives.

CM6 - Compliant 3D printed robotic arm

petar-crnjak Petar Crnjak

My Home Laser Cutter Journey

I want a Laser Cutter!

hari-wiguna Hari Wiguna

360 degrees 3D LiDAR project

OpenLiDAR

robin-frjd Robin Fröjd

adding an ESP-12 with some flipflop magic and MQTT

hacking a smoke detector

This display accomplishes an impossible task : everyone, in all directions, has the impression that the display is following him !!!

Omnidirection Display

A GPS Hat for the Raspberry Pi Zero form factor.

Raspberry Pi Zero GPS Hat

brandon-smith Brandon Smith

The 3d design is adorned with 20 servos, embedded proximity sensors, lighting effects, and breath sensing to allow the design to come alive.

SpiderDress

using JAVA and Pi4J

Display messages on 16X2 LCD | Raspberry Pi

bikash-narayan-panda Bikash Narayan Panda

Guys Checkout my Home Automation System V_1 which I have devloped around Arduino/ENC28J60 and is quite stable. Right now I am working on V_2

Home Automation System V_1

bikash-narayan-panda Bikash Narayan Panda

Or how to write firmware the weird way to submit a project in the 1kB Challenge.

Hardware based RGBW Lamp controller

View all

Bits

Salah wrote 11/01/2018 at 23:01

Thanks for the "follow" I really appreciate it !

Are you sure? yes | no

Patrick Van Oosterwijck wrote 06/22/2018 at 15:39

Thank you for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE and #LiFePO4wered/Pi projects Mark! You might also want to check out my next gen #LiFePO4wered/Pi+ project, since it functionally replaces the LiFePO4wered/Pi. :)

Are you sure? yes | no

RUN.CAM wrote 07/15/2017 at 05:56

Thank you for following RGGBer project. It is now live on

https://www.crowdsupply.com/jie-zou/rggber-dev-kit and we will launch it in Aug 2017 and you may sign up for latest information. RGGBer Dev Kit makes embedded vision development easy!

Are you sure? yes | no