Close
0%
0%

mahendra0911

Industrial Designer and Wandering Hobbyist.

Following
Send a private message
Similar accounts worth following
2 Followers
45 Following
0 Projects
0 Likes
mahendra0911
Send a private message

This user joined on 08/03/2018.

43.1k
1.8k
82
503
RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.
Project Owner Contributor

RepRap HELIOS

nicholas-sewardNicholas Seward

19k
783
9
106
Building a camera for 360-degree, stereoscopic 3D photos.
Project Owner Contributor

VR Camera: FPGA Stereoscopic 3D 360 Camera

colin-pateColin Pate

9.8k
4.9k
13
41
To solve the age-old first-world-problem of having too many automatic mechanical watches, configurable from a smartphone!
Project Owner Contributor

IoT Mechanical Watch Winder

solenoidSolenoid

8.5k
1.3k
1
56
Rover is a big four wheel drive 3D printed robot you can make at home. It's CC0 open source, so anyone can use it.
Project Owner Contributor

Rover V2 four wheel drive robot

tlalexandertlalexander

7.2k
506
0
11
A new way of thinking to a IOT thermostat:
Project Owner Contributor

FCThermostat: Another overengeneered IOT device

nicolNicolò

4.3k
3.8k
0
91
Very small robots with features equivalent to their larger counterparts. For classrooms, robotics labs and more!
Project Owner Contributor

Micro Robots.

joshua-elsdonJoshua Elsdon

3.1k
3.1k
0
37
Using a fully 3d-printed two-axis rotational stage, an arduino and a camera to produce accurate 3D Models
Project Owner Contributor

High Quality 3D Scanner (<100€)

thomasThomas

2.4k
2.4k
2
32
Using 2 IKEA Lack Tables I am creating a Large Format 3d printer with a build platform of X 340mm Y310mm Z 300mm
Project Owner Contributor

PRINTTABLE an affordable, attractive 3d printer.

waynewayne

2k
1.5k
7
15
Educational Robotics platform merging Cardboard and Electronics
Project Owner Contributor

BOXBOTICS

pure-engineeringPure Engineering

1.6k
587
0
9
Using the 8BitRobots Module to operate a 3D printed robot arm
Project Owner Contributor

3D Printed Robot Arm: 8BitRobots

tim-wilkinsonTim Wilkinson

1.4k
1.4k
0
7
Cheap WiFi Module for Internet of Things (IoT) projects
Project Owner Contributor

ESP8266 Arduino Tutorial and Review

geekstipsgeekstips

1k
1k
4
2
Recording my attempt to hack a 4 valve Melnor Digital Water Timer and add IOT functionality to control it remotely
Project Owner Contributor

Melnor Water Valve Timer - IOT Hack

isaac-hayesIsaac Hayes

1k
1.7k
1
5
This project that I made in my university was about get a virtual reality with Arduino.
Project Owner Contributor

Arduino+Virtual reality+Wii

diegoballesterosDiegoBallesteros

616
754
1
1
Need developer for my Moto Z mod phone project
Project Owner Contributor

Moto Mod

yogeshengineerukyogesh.engineer.uk

613
611
0
8
A shoulder mounted soft robotics air puppet that uses beat detection and forward/reverse fans to dance the night away.
Project Owner Contributor

Soft Robotics Ducted Dancer

curt-whiteCurt White

351
293
1
6
Signal strength? Battery? Wireless is not always the best solution for IoT. Build a 'wired' Arduino-compatible IoT platform with CAN-bus.
Project Owner Contributor

Uncon Talk: Building a 'wired' IoT network.

alain-pannetratAlain Pannetrat

259
183
0
1
A 3D-printable clip to repair fragile vertical PVC blinds on patio doors.
Project Owner Contributor

3D-Printable Patio Blind Repair

spaceelectroSpaceElectro

225
225
0
3
The barometric control of the drone is lagging if there is any wind outside. So I decided to modify it.
Project Owner Contributor

Syma X56W barometric mod

lanet1Lanet1

View all

Share this profile

Share

Bits

Send a private message to mahendra0911

Become cool instantly

Create your Hackaday.io profile like mahendra0911 and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "mahendra0911", please tell us the reason.