0%

0%

Marco

Student of Information Systems at the university of Cologne

Leverkusen

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/08/2021.

Projects I Contribute To

2021 Hackaday Prize

We want to help people who are unable to communicate verbally and cannot use sign language by providing a wearable “eye-to-speech" solution.

Eye-to-Speech Module

Projects I Like & Follow

Reverse engineering the SMA-Q2 smartwatch to run open source firmware on it

Color Open Source Smartwatch

emeryth emeryth

The 2016 Hackaday Prize

Robotic Exoskeleton for Grip Enhancement and Stroke Rehabilitation

BEOWULF

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

The 2015 Hackaday Prize

open source circular knitting machine replicable with digital fabrication and makers' tools.

Circular Knitic

varvara guljajeva

uGFX was written for use with makefiles. Using it in arduino is possible with minimal effort, though. Here's how.

using uGFX in Arduino

Tomographic scanner using my X-Ray machine, a simple motor to rotate the object and a reconstruction software

X-Ray CT Scanner

The 2016 Hackaday Prize

A system that tracks limb movement of people who have movement disorders to assist in diagnosis and therapy

Human Limb Tracking

The 2018 Hackaday Prize

A Wearable, "Smart", Internet of Things Development Board That Learns

BodiHub

Usb phyton controlled heated bed for M3D 3d printer, making abs printing possible

Heated Bed for M3D 3d Printer

2021 Hackaday Prize

We want to help people who are unable to communicate verbally and cannot use sign language by providing a wearable “eye-to-speech" solution.

Eye-to-Speech Module

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

how to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

Home Automation Using Blynk & ESP32 IoT Project

The ShopArm is an easily implemented robot arm. Just train it and then use it

ShopArm: A Practical 3D Printed Robot Arm

Multi-Functional Custom Robotic Research Platform

PROJECT MOOBA

Arduino IDE for Building Compiling Environment of ESP32

Arduino IDE for Building Environment of esp32

Measure air quality, sound, light, particulates, temperature, humidity, and more. Raspberry Pi and Arduino compatible.

Metriful: Indoor Environment Monitor

A 3D Printed Mechanical Seven Segment Display: Design and Test.

A 3D Printed Mechanical Seven Segment Display.

ON/OFF lamp using Arduino - Light Sensor

On/Off Lamp by light sensor using Arduino

View all

Bits